Pic request

CloudStrife
Club4AG Pro
Posts: 630
Joined: Thu Oct 06, 2016 2:23 pm
Location: Middle of Hell, Florida

Pic request

Postby CloudStrife » Wed Feb 14, 2018 8:51 pm

Can anyone shoot me a picture of how the resistor pack for the injectors mounts? I took it off to PC and forgot lol.

Also the manifold stay bracket..if you could.. :)
Success guardian... Successsssssss..

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


MisterJerk
Club4AG Pro
Posts: 577
Joined: Wed Jan 09, 2013 6:10 pm

Re: Pic request

Postby MisterJerk » Fri Feb 16, 2018 1:06 pm

If I can remember, I will take a pic tonight. In the mean time. The resistor pack mounts to a little bracket that is spot welded to the body under where the Maf goes.

Manifold bracket bolts to hole in side of manifold, other end is a threaded hole on the motor mount bracket.

CloudStrife
Club4AG Pro
Posts: 630
Joined: Thu Oct 06, 2016 2:23 pm
Location: Middle of Hell, Florida

Re: Pic request

Postby CloudStrife » Sat Feb 17, 2018 3:04 am

Thanks MisterJerk,

On my GT-S the resistor pack isn't permanently mounted. It screws onto the bracket, and the bracket bolts to a chassis thread. I'm just not sure where lol. I have a new fuel filter with bracket I want to throw on, but I wanted to wait because I vaguely remember that the resistor pack had to come off first..

The only question I have about the manifold bracket.. Is it gonna be a bitch to get on the motor mount side?
Success guardian... Successsssssss..

notnilc20
Club4AG Pro
Posts: 562
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Pic request

Postby notnilc20 » Sat Feb 17, 2018 8:30 pm

Meant to post these and forgot....sorry for the delay my bro.
Kinda hard to get the camera down in there but here is the fuel injector resistor. You can see the relation with the water overflow container in the background and the ac low pressure line next to the mounting bracket...
Image

Here is the intake manifold stabilizer (2 pics)
At the motor mount.
Image

At the intake manifold mounting location
Image

Hope these help....lemme know if you need a better angle.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


CloudStrife
Club4AG Pro
Posts: 630
Joined: Thu Oct 06, 2016 2:23 pm
Location: Middle of Hell, Florida

Re: Pic request

Postby CloudStrife » Sun Feb 18, 2018 7:09 am

Thanks bro that helps so much! I don't know why but I like the gold on your resistor pack lol.
Success guardian... Successsssssss..

notnilc20
Club4AG Pro
Posts: 562
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Pic request

Postby notnilc20 » Sun Feb 18, 2018 7:12 am

CloudStrife wrote:Thanks bro that helps so much! I don't know why but I like the gold on your resistor pack lol.


Hehe...gold makes everything look more important. It was all crusty and corroded so I decided to clean it up a little and had some extra paint lying around. ;)

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: Corolla AE86”

Who is online

Users browsing this forum: No registered users and 3 guests