Question about JDM Zenki Trueno Bumper Retainers
Posted: Mon Jan 29, 2018 5:22 pm
Hey all,
I have circled the retainers I’m inquiring about. Will the USDM Zenki retainers (front and rear) fit the JDM zenki bumpers? The part numbers are different between the USDM and JDM but will the USDM work? I have tried to track these retainers down with no luck.
Note: The LH Bumper seal is on my stock USDM Zenki bumper so that can be ignored.
A little background:
I’m nearly complete with all the brackets, screws, nuts, and bolts to install both the front and rear JDM zenki Trueno bumpers onto my Zenki USDM Hatch. I’m reaching out to those of you that have done this before for your expertise.
I have circled the retainers I’m inquiring about. Will the USDM Zenki retainers (front and rear) fit the JDM zenki bumpers? The part numbers are different between the USDM and JDM but will the USDM work? I have tried to track these retainers down with no luck.
Note: The LH Bumper seal is on my stock USDM Zenki bumper so that can be ignored.
A little background:
I’m nearly complete with all the brackets, screws, nuts, and bolts to install both the front and rear JDM zenki Trueno bumpers onto my Zenki USDM Hatch. I’m reaching out to those of you that have done this before for your expertise.