rear shock bushing
Posted: Mon Jul 17, 2017 11:41 am
So, I've got some QA1 coilovers on the rear, and one of them is blown. Getting that taken care of, as they're rebuildable with a couple o-rings and seals, and new oil; no problem. These have been on the car since I got it many moons ago (2006-ish?) and I've not had to do much.
Now, I'm in the process of swapping over the "good" parts to my coupe, and found that the steel sleeve inside the bushing that fits over the axle mounting bolt is seized on one side.
With that being said, I'd like to just put new bushings/sleeves in on both sides, and have done with it.
My question is does the collective hive-mind have preferred parts for this or other coil-over options?
--sarge
Now, I'm in the process of swapping over the "good" parts to my coupe, and found that the steel sleeve inside the bushing that fits over the axle mounting bolt is seized on one side.
With that being said, I'd like to just put new bushings/sleeves in on both sides, and have done with it.
My question is does the collective hive-mind have preferred parts for this or other coil-over options?
--sarge