GZE piston into the "new" ZR block

Gino1X1
Club4AG Enthusiast
Posts: 124
Joined: Wed Jun 05, 2013 10:59 am

GZE piston into the "new" ZR block

Postby Gino1X1 » Thu May 11, 2017 8:39 am

A couple of questions. We've acquired a 1ZRFE longblock out of a Voxy and the owner is contemplating a low psi turbo built up. Low psi as in under 1bar. So we looked into the possibility of fitting a set of hi-comp GZE pistons into that engine, fully aware we shall have to overbore that block 0.5mm oversize.

So, will said block (in general, that is) take that overbore?

Is the GZE piston top volume okay with the cyl head chamber?

And then..... seeing my experience with the 1ZZFE is a kind of a throwaway engine, shall it still be durable enuff/enough for dd?

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


Return to “TECH: Corolla AE86”

Who is online

Users browsing this forum: No registered users and 10 guests