Greetings Guys,
Im considering the 3SGE Beams swap, as it seems to be a pretty stout 2.0 N\A motor. I want to keep this in the Toyota Family so no F series honda motor suggestions thanks.
Im really NOT interested in cutting my trans tunnel or frame to make this fit. So what I can't determine is if I can get a transmission that will stick out of the stock shifter hole, and bolt to the rear of the 3SGE engine.
Thanks!
School me on the 3SGE Swap
- gotzoom?
- Club4AG Expert
- Posts: 403
- Joined: Fri Jan 11, 2013 8:42 am
- Location: Silicon Valley, CA
- Contact:
Re: School me on the 3SGE Swap
You'll need to cut the trans tunnel. The shift lever is not in the same place. That said, a BEAMS powered car is pretty epic!
I took a guy for a ride on Laguna Seca last month and he had a camera on his helmet, so you can get an idea what it looks and sounds like. I was driving a buddy's car.
https://www.youtube.com/watch?v=5vzzU7TULWc
I took a guy for a ride on Laguna Seca last month and he had a camera on his helmet, so you can get an idea what it looks and sounds like. I was driving a buddy's car.
https://www.youtube.com/watch?v=5vzzU7TULWc
Re: School me on the 3SGE Swap
Re-using the 3SGE 6spd, I know you must cut the tunnel, Im curious if another transmission can be bolted up to the 3S, or the bellhousing, to create a 5spd swap option , or anyway, to make the beams work without the cut.
If I must cut, i'll probably scrap the 3S idea, and move back to my previous thought process.
Thanks!
If I must cut, i'll probably scrap the 3S idea, and move back to my previous thought process.
Thanks!
Re: School me on the 3SGE Swap
peep this guy's worklog (not exactly the same since it's a 3sge going to a 5sgte). it might give you some insight - http://hachiroku.net/forums/showthread. ... sgte+build. he's on c4ag as bnicolas and he's selling this car in the classified section too. looks like he used a w55 transimission with custom bellhousing and driveshaft.
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: School me on the 3SGE Swap
if you can find a shifter from Leen(the guys who brought the adaptor for the 6speed for the 4age.)
Im guessing they are now out of biz, since their site is down now.
here's a pic:
Im guessing they are now out of biz, since their site is down now.
here's a pic:
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/
Re: School me on the 3SGE Swap
Or you could do a mod like this guy to relocate the shifter on the 6 speed: http://www.aeu86.org/forum/showthread.p ... 31&page=51
Last edited by Deuce Cam on Tue Jun 23, 2015 2:45 pm, edited 1 time in total.
- grappletech
- Club4AG Expert
- Posts: 344
- Joined: Sat Jan 12, 2013 12:13 pm
Re: School me on the 3SGE Swap
http://www.ae86drivingclub.com.au/forum ... (inc-Beams)-into-AE-KE-thread
This is a good starting place . If you have any specific questions I'll point you in the right direction...
This is a good starting place . If you have any specific questions I'll point you in the right direction...
87 GTS Coupe stock and Super Duper Clean
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
Re: School me on the 3SGE Swap
^Awesome thread, thanks!