simple ae86 build up

rapid1946
Posts: 4
Joined: Fri Aug 22, 2014 4:17 am

Re: simple ae86 build up

Postby rapid1946 » Fri Aug 22, 2014 7:07 pm

beautiful job on your yota!! i need help with my 20v. i have everything completed, however im just missing the engine harness. the wiring is whats putting me at a stop and the guy i sent it to told me that he couldnt get any diagrams on how to put it together he said i needed to find a direct jdm shop to work on it. however seeing your thread has given me hope. can you point in me in any direction to find out how to put the engine harness together so i can get it to start? or can you guide me how to do it or give me some contacts that work on it? i live in orlando florida, id really appreciate your help!!!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


shagymc
Club4AG Expert
Posts: 353
Joined: Mon Jan 14, 2013 9:43 pm

Re: simple ae86 build up

Postby shagymc » Fri Aug 22, 2014 7:10 pm


haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Fri Aug 22, 2014 10:18 pm

bash bar got prettied
Image

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sun Aug 24, 2014 1:14 am

Image

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


95gto
Club4AG Regular
Posts: 10
Joined: Thu Aug 29, 2013 6:11 am
Location: STL

Re: simple ae86 build up

Postby 95gto » Tue Aug 26, 2014 11:34 am

I am preparing for an SR20 swap as well and I had some questions about the swap kit you used. It looks like you went with the JSP kit is that correct? Aside from having to cut the trans tunnel did you have to do anything else to fit the motor and trans aside from bolting in the kit? And it looks like you used poly motor mounts, what type did you use?

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Tue Aug 26, 2014 1:39 pm

trans tunnel is not cut at all, jsp kit does not require cutting of the body.
mounts are poly, i would advise against them if you are going to daily the car at all.

sekang0
Club4AG Expert
Posts: 202
Joined: Fri Jan 11, 2013 7:46 pm
Location: Stockton, CA

Re: simple ae86 build up

Postby sekang0 » Tue Aug 26, 2014 5:10 pm

Nice build! Love that bash bar pic too!
'85 GT-S project since 2010
Image

95gto
Club4AG Regular
Posts: 10
Joined: Thu Aug 29, 2013 6:11 am
Location: STL

Re: simple ae86 build up

Postby 95gto » Wed Aug 27, 2014 8:08 am

haymaker wrote:trans tunnel is not cut at all, jsp kit does not require cutting of the body.
mounts are poly, i would advise against them if you are going to daily the car at all.


I was referrring to the shifter hole with my question which now that I think about it that was poor word choice on my part.

I have been reading up on the conversion threads that are out there and in the one where the wrench pro kit is discussed someone mentioned a lot of extra work required to make the JSP kit work but aside from cutting the shifter hole and doing a custom exhaust I am not sure what stuff people are talking about.

And I don't plan on daily driving the car but I do want to make it comfortable to drive, so I appreciate the info on the poly mounts.

rapid1946
Posts: 4
Joined: Fri Aug 22, 2014 4:17 am

Re: simple ae86 build up

Postby rapid1946 » Sun Aug 31, 2014 4:10 pm

marley4us wrote:Super cool man

I must admit, exellent workmanship,super and thanks for sharing.

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sat Sep 13, 2014 9:57 pm

tuned up

Image
Image


351hp
307tq
18psi
fucker

Clouds
Club4AG Expert
Posts: 437
Joined: Thu Oct 31, 2013 6:03 am
Location: Georgia

Re: simple ae86 build up

Postby Clouds » Sun Sep 14, 2014 9:59 am

haymaker wrote:351hp
307tq
18psi
fucker

350hp? The pull must be crazy! ;)
There shouldn't be a day that goes by where you don't learn something new.

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sun Sep 14, 2014 11:49 am

other than a a lil goofin around after, i haven't really gotten to stretch its legs, on the way to the dyno, my front wheel bearing started to fail, so i had to limp it home.

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Mon Nov 24, 2014 6:24 pm

soooooooooooooooooooooooooo...
i saw brendan becoming a millionaire selling cam knob to the masses, so i decided i wanted to take a bite of that hot action.
Image
Image
Image

the third wheel acts as a skirt, if i ever get around to making a shift boot, it'll tuck nicely in there
Image

Image
it's dark in my car, goth car.
Image
Image

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Mon Nov 24, 2014 6:33 pm

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

next up
Image

AimlessArrow
Club4AG Regular
Posts: 28
Joined: Fri Apr 11, 2014 7:04 pm
Location: SoCal

Re: simple ae86 build up

Postby AimlessArrow » Wed Nov 26, 2014 9:55 am

Daaaaang the skate wheel shifter adds such a nice touch!

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sun Dec 07, 2014 6:15 pm

fitted the front aero
Image

Image

Image

Image

Image

Image

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Fri Jul 10, 2015 5:59 pm

probably got cancer today.

anyone that has seen my car up close knows that the paint had crazy cracks in it from a combination of hot sun and the paint being laid on too thick.
the roof and doors were the worst, that is no longer a problem

doors off
Image

found where the roof meets the rear quarter
Image

naked roof
Image
Image

Image


doors
Image

Image

Image

Image

all the paint from both doors
Image




Image


all of the fiberglass panels are ready for primer, chassis still needs a bunch of work.

User avatar
smackdownz
Club4AG Regular
Posts: 48
Joined: Sat May 16, 2015 2:57 am

Re: simple ae86 build up

Postby smackdownz » Sat Jul 11, 2015 3:56 am

crazy build dude, good work

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sun Aug 23, 2015 6:38 pm

Image

boosted86
Club4AG Enthusiast
Posts: 114
Joined: Sat Feb 23, 2013 9:14 pm

Re: simple ae86 build up

Postby boosted86 » Sun Aug 23, 2015 7:21 pm

Got damn that looks good! Black looked awesome this is better!

What suspension you rolling on? Might have missed it thru the pages.

SR86RD
Club4AG Enthusiast
Posts: 100
Joined: Mon Jan 21, 2013 5:08 pm

Re: simple ae86 build up

Postby SR86RD » Mon Aug 24, 2015 11:47 am

wow, inspiring

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Mon Aug 24, 2015 11:54 am

boosted86 wrote:Got damn that looks good! Black looked awesome this is better!

What suspension you rolling on? Might have missed it thru the pages.



i have bc racing that have been re-oiled with swift springs.

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sun Sep 13, 2015 1:48 am

Image

Clouds
Club4AG Expert
Posts: 437
Joined: Thu Oct 31, 2013 6:03 am
Location: Georgia

Re: simple ae86 build up

Postby Clouds » Mon Sep 14, 2015 9:55 pm

This build is always so cool
There shouldn't be a day that goes by where you don't learn something new.

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sun Nov 22, 2015 9:51 am

Image



pretty happy with it

Deuce Cam
Posts: 1324
Joined: Sun Jan 13, 2013 2:41 pm
Location: AZ

Re: simple ae86 build up

Postby Deuce Cam » Fri Nov 27, 2015 9:58 am

That color looks really good.

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sun Nov 29, 2015 9:37 pm

thanks man!

did you move out of state?

Deuce Cam
Posts: 1324
Joined: Sun Jan 13, 2013 2:41 pm
Location: AZ

Re: simple ae86 build up

Postby Deuce Cam » Mon Nov 30, 2015 7:32 pm

Yep. Greenville, SC... It's...interesting :|. At least all the roads are windy and I'm near the mountain passes.

Did you get that strut bar installed? I grabbed the steel 2 point version a while back before t3 had them. It's stark white :|, but legit - no flexing this thing by hand on car (unlike the others I've had).

Billy_Andrea
Club4AG Expert
Posts: 417
Joined: Thu Jan 10, 2013 10:08 pm
Location: SF

Re: simple ae86 build up

Postby Billy_Andrea » Mon Nov 30, 2015 8:10 pm

Love the design, love the car, love the color.
Love it.

haymaker
Club4AG Enthusiast
Posts: 103
Joined: Mon Jan 14, 2013 8:44 pm

Re: simple ae86 build up

Postby haymaker » Sat Dec 26, 2015 4:02 pm

thanks billy,

that's actually a pretty heavy compliment considering how excellent your build is.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “OWNERS and BUILDERS”

Who is online

Users browsing this forum: No registered users and 3 guests