My DD Lovin K24

ariethekid
Club4AG Regular
Posts: 18
Joined: Fri Jan 11, 2013 9:37 pm

Re: My DD Lovin K24

Postby ariethekid » Thu Apr 10, 2014 10:29 pm

Looking good. I'm actually doing this swap too. I have all the TSX wiring harness so I decided to use that to figure out the wiring. I had a question about fuel lines though.
What was your solution for the fuel lines?
Did you use stock Gts fuel lines or a custom job? I have an SR5 so that may be a problem.
Also did you use the original fuel pump as well?

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
ToeKnee805
Club4AG Expert
Posts: 299
Joined: Wed Jan 09, 2013 8:17 pm
Location: Southern California, 805

Re: My DD Lovin K24

Postby ToeKnee805 » Sun Apr 13, 2014 12:59 pm

holy hell dougie! WTF happened to this build. Its way insane..

Im barely gonna turbo the motor you sold me haha -_- i work a little slower.
1986 Corolla GT-S -- Unmolested -- Now Resto Project
1985 Corolla GT-S -- Turbo Levin Track Car
1982 Corolla 1.8 -- Sitting collecting dust

User avatar
SuperDougy
Club4AG Enthusiast
Posts: 56
Joined: Sat Jan 12, 2013 8:46 am
Location: Bay Area

Re: My DD Lovin K24

Postby SuperDougy » Tue Jun 03, 2014 3:55 pm

I used the stock GTS fuel line for the f22 so they should work for the k24 as well. I have an aftermarket fuel pump but I'm most likely going to upgrade the pump, not sure what I'll use at the moment.

Do you have a build thread up? Not many K86 build threads so it would be nice to see another.

ariethekid wrote:Looking good. I'm actually doing this swap too. I have all the TSX wiring harness so I decided to use that to figure out the wiring. I had a question about fuel lines though.
What was your solution for the fuel lines?
Did you use stock Gts fuel lines or a custom job? I have an SR5 so that may be a problem.
Also did you use the original fuel pump as well?
85 Levin GTS K24
viewtopic.php?f=7&t=709

User avatar
SuperDougy
Club4AG Enthusiast
Posts: 56
Joined: Sat Jan 12, 2013 8:46 am
Location: Bay Area

Re: My DD Lovin K24

Postby SuperDougy » Tue Jun 03, 2014 3:57 pm

At least you get to drive yours and probably have driving skills that are insane now. LOL

ToeKnee805 wrote:holy hell dougie! WTF happened to this build. Its way insane..

Im barely gonna turbo the motor you sold me haha -_- i work a little slower.
85 Levin GTS K24
viewtopic.php?f=7&t=709

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


ariethekid
Club4AG Regular
Posts: 18
Joined: Fri Jan 11, 2013 9:37 pm

Re: My DD Lovin K24

Postby ariethekid » Fri Jun 06, 2014 6:18 pm

SuperDougy wrote:I used the stock GTS fuel line for the f22 so they should work for the k24 as well. I have an aftermarket fuel pump but I'm most likely going to upgrade the pump, not sure what I'll use at the moment.

Do you have a build thread up? Not many K86 build threads so it would be nice to see another.

ariethekid wrote:Looking good. I'm actually doing this swap too. I have all the TSX wiring harness so I decided to use that to figure out the wiring. I had a question about fuel lines though.
What was your solution for the fuel lines?
Did you use stock Gts fuel lines or a custom job? I have an SR5 so that may be a problem.
Also did you use the original fuel pump as well?


Ok, I might big the sr5 lines a try, if it doesn't work, I'll go custom. do you have a return fuel system or a returnless type? I know Tsx uses a return less system, just curious if you went through the trouble.

Last question. Do you still have your card board templates for the engine mounts? If you have a scanner and a ruler could you scan the templates with the ruler labeled right and left that I could use to help me get the engine mounted easier? Thanks a lot. That would help big time, because I'm using jsp mounts too.

User avatar
SuperDougy
Club4AG Enthusiast
Posts: 56
Joined: Sat Jan 12, 2013 8:46 am
Location: Bay Area

Re: My DD Lovin K24

Postby SuperDougy » Sat Mar 07, 2015 10:12 am

The K24 Levin was pulled out of mothballs and loaded on a trailer to be dropped off at JSP where it will get a custom tri-y header and exhaust plus sort out the wiring to get it running again. I'm very excited that I'm coming to the end of this project and will have it on the road again. Here are a few photos of the Levin's current sorry state. 

Imagehttps://flic.kr/p/reaKN4 by superdougy, on Flickr

Imagehttps://flic.kr/p/re47bo by superdougy, on Flickr

Imagehttps://flic.kr/p/qyC91C by superdougy, on Flickr

ImageUntitled by superdougy, on Flickr

Imagehttps://flic.kr/p/rto3Kj by superdougy, on Flickr

Imagehttps://flic.kr/p/re3mU1 by superdougy, on Flickr
85 Levin GTS K24
viewtopic.php?f=7&t=709

JDM20VAE101
Club4AG Expert
Posts: 389
Joined: Fri Jan 11, 2013 10:13 pm

Re: My DD Lovin K24

Postby JDM20VAE101 » Mon Nov 07, 2016 4:20 pm

Awesome Man! any updates?
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking! :D

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “OWNERS and BUILDERS”

Who is online

Users browsing this forum: No registered users and 2 guests