1981 TE72 3TC Forged
Re: 1985 SR5 3TC Forged
Awesome, how much did they set you back?
I think I might have to order from that shop that you went to!
I think I might have to order from that shop that you went to!
Re: 1985 SR5 3TC Forged
Hey red,
check this out -->> http://www.3tcgarage.com/viewtopic.php?f=42&t=13466
Josh,
how long has it been since you ordered those bearings from BRD? have you dealt with brd before?
check this out -->> http://www.3tcgarage.com/viewtopic.php?f=42&t=13466
Josh,
how long has it been since you ordered those bearings from BRD? have you dealt with brd before?
Re: 1985 SR5 3TC Forged
How much would it cost to build up the block?
I am shooting for about 320hp, if that would even require it, I hear that those are very stout engines.
I am shooting for about 320hp, if that would even require it, I hear that those are very stout engines.
Re: 1985 SR5 3TC Forged
It depends on what you are capable of doing and how much you want to spend.
From some of the searching I have done and chatted with a couple of 3tc guys, that is capable on a stock motor with boost.
Not sure how long it would last but its definately capable. A guy I chat with in Iowa nows a dude with a stock 3tc, he added
a turbo and went in the 7s in the 1/4. They are very stout, thats what drew me to them, small compact powerhouses.
I was fortunate enough to find a complete spare motor/tranny locally to. I am planning on doing the same thing, build my spare.
The only difference I'm doing is going fuel injected instead of boosting it. I think an injected 3tc would be pretty awesome, then later on boost it.
From some of the searching I have done and chatted with a couple of 3tc guys, that is capable on a stock motor with boost.
Not sure how long it would last but its definately capable. A guy I chat with in Iowa nows a dude with a stock 3tc, he added
a turbo and went in the 7s in the 1/4. They are very stout, thats what drew me to them, small compact powerhouses.
I was fortunate enough to find a complete spare motor/tranny locally to. I am planning on doing the same thing, build my spare.
The only difference I'm doing is going fuel injected instead of boosting it. I think an injected 3tc would be pretty awesome, then later on boost it.
Re: 1985 SR5 3TC Forged
Hey Guys sorry Mothers Day was crazy...
Ok I will now answer questions in thread...
redroku87 - the block alone was about 950.00 that includes:
K547M87 Wiseco Pistons Toyota Corolla 16V 1.8L 3TC 87mm 7.5:1
CRS4850TA3D Eagle H-Beam Rods Toyota Corolla 3TC
203-4206 RP Toyota 1.6L (2TC) & 1.8L (3TC) 12pt head stud kit
C4258-040 Cometic Head Gasket 87mm .040 Toyota Corolla 1.6L 2TC 3TC
Head was rebuilt and was roughly 500.00: that includes:
Stainless Steel Valves and Bronze Valve Guides
Luckily my head was in good shape
Also my fabricator does all head porting so I do not have to pay a machine shop
Block had to be bored and honed with was the brunt of the 500.00
Cam was sent off to be reground and also got new cam bearings
Turbo:
New Precision 6262
I ordered the cam bearings from BRD the sales guy was a retard and didnt enter my credit card properly and the parts didnt get ordered i had to call and get them ordered again they came in last week FINALLY.
sqznby : You are spot on that is the build that my fabricator is working on as well.. if you are interested in getting info shoot him a PM.
redroku87 : They will handle roughly about 200 NA and about 250 Turbo if you are going over that I would suggest at least building the block if you want to reach 300.
sqznby: My build will be boost and injected for your info just havent gotten there yet... We were going to go blow thorugh but he wants to take it EFI.
Josh
Ok I will now answer questions in thread...
redroku87 - the block alone was about 950.00 that includes:
K547M87 Wiseco Pistons Toyota Corolla 16V 1.8L 3TC 87mm 7.5:1
CRS4850TA3D Eagle H-Beam Rods Toyota Corolla 3TC
203-4206 RP Toyota 1.6L (2TC) & 1.8L (3TC) 12pt head stud kit
C4258-040 Cometic Head Gasket 87mm .040 Toyota Corolla 1.6L 2TC 3TC
Head was rebuilt and was roughly 500.00: that includes:
Stainless Steel Valves and Bronze Valve Guides
Luckily my head was in good shape
Also my fabricator does all head porting so I do not have to pay a machine shop
Block had to be bored and honed with was the brunt of the 500.00
Cam was sent off to be reground and also got new cam bearings
Turbo:
New Precision 6262
I ordered the cam bearings from BRD the sales guy was a retard and didnt enter my credit card properly and the parts didnt get ordered i had to call and get them ordered again they came in last week FINALLY.
sqznby : You are spot on that is the build that my fabricator is working on as well.. if you are interested in getting info shoot him a PM.
redroku87 : They will handle roughly about 200 NA and about 250 Turbo if you are going over that I would suggest at least building the block if you want to reach 300.
sqznby: My build will be boost and injected for your info just havent gotten there yet... We were going to go blow thorugh but he wants to take it EFI.
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Finally got the block back from the machine shop with cam bearing installed... will post pics up asap.
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Pics added
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
I knew that intake looked familiar, hah. He does some nice work.
I'm interested in what he is going to do for the fuel injected manifold. Has he gone over it with you?
The block looks great. What exactly did you have done to it? Cost? If you dont mind sharing, you can PM me if you'd like.
Are you assembling it?
Its coming along man, I get excited every time I see a new post in your thread, hah. Its going to be some time before I'm at this point.
Great job man
I'm interested in what he is going to do for the fuel injected manifold. Has he gone over it with you?
The block looks great. What exactly did you have done to it? Cost? If you dont mind sharing, you can PM me if you'd like.
Are you assembling it?
Its coming along man, I get excited every time I see a new post in your thread, hah. Its going to be some time before I'm at this point.
Great job man
Re: 1985 SR5 3TC Forged
have you ever seen an ae86 riding a segway lol nice build i almost got into a 3tc. if i would have gotten it i would have thrown it into an rx-7 shell
Re: 1985 SR5 3TC Forged
Hey Guys so info :
Block consisted of boring and honing and installation of cam bearing by Goza roughly about 500.
Assembly should be shortly now that we have all of the parts. The cam should be in we sent it out to be reground.
Josh
Block consisted of boring and honing and installation of cam bearing by Goza roughly about 500.
Assembly should be shortly now that we have all of the parts. The cam should be in we sent it out to be reground.
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Nice man, lookin forward to your updates.
Re: 1985 SR5 3TC Forged
I am hoping to have engine assembled by end of week next week.
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Hows the motor coming along?
Where did you get the stainless valves in stock dimensions? Could you send me a link?
Looks like I'm going to have to do my head sooner than later.
Thanks
Where did you get the stainless valves in stock dimensions? Could you send me a link?
Looks like I'm going to have to do my head sooner than later.
Thanks
Re: 1985 SR5 3TC Forged
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Ok cool. I'll have to give him a call.
How was the turnaround time from when you placed the order until you recieved it?
Thanks
How was the turnaround time from when you placed the order until you recieved it?
Thanks
Re: 1985 SR5 3TC Forged
Not sure my engine builder placed the order the only issue was with the cam bearings they lost the CC number and we had to reorder etc...
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Any updates?
Re: 1985 SR5 3TC Forged
Sorry man major crap hit me and havent been able to update should have built 3TC updates asap.
My engine builder has gone out of town until beginning of July. SUCKS
Josh
My engine builder has gone out of town until beginning of July. SUCKS
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Oh man, that puts quite the damper on things.
Well, good things come to those who wait
Well, good things come to those who wait
Re: 1985 SR5 3TC Forged
in for some updates
Re: 1985 SR5 3TC Forged
I wish my builder is still in Puerto Rico visiting family once he returns updates will be coming...
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Builder has returned have dropped off money for Turbo Cam and will be ordering soon.
Once Cam comes in the BUILD will begin... I will see if he can send me some pics asap.
Josh
Once Cam comes in the BUILD will begin... I will see if he can send me some pics asap.
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Nice to see a 3tc build on here! Great job
Re: 1985 SR5 3TC Forged
Still waiting on can to be grinded and then shipped back will update soon.
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Holy Butthole still waiting on Cam to be grinded once done its on like donkey kong..
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Ohh snap everyone...
The BUILD will begin this weekend stay tuned for pics and assembly... BUAHA HA HA
Josh
The BUILD will begin this weekend stay tuned for pics and assembly... BUAHA HA HA
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
Re: 1985 SR5 3TC Forged
Updated pics on first page... Yea Maaannn
Josh
Josh
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?
-
- Club4AG Regular
- Posts: 14
- Joined: Mon Jan 14, 2013 10:20 pm
Re: 1985 SR5 3TC Forged
This is interesting!
A lot of i hear here i hear there lol awesome,
A lot of i hear here i hear there lol awesome,
Re: 1985 SR5 3TC Forged
Ohh snap enter the BUILDER...LOL
Well everyone if you have questions on how to build a stupid fast engine please feel free to annoy my builder...LOL
TOYOTA1515
Well everyone if you have questions on how to build a stupid fast engine please feel free to annoy my builder...LOL
TOYOTA1515
I could go fast but it would just embarrass you... LOL
GOT 3TC?
GOT 3TC?