Page 1 of 2
Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russia.
Posted: Tue Mar 17, 2015 1:07 am
by mert995
The first part of the story.
viewtopic.php?f=4&t=3564&p=96244#p96244my instagram "japanese.shop"
All work done with his father dvoem
Now raskaz about what has been done for 4 years.
bought the clutch basket and clutch release "exedy" on MT T50.
was bought by motor 4a-ge.
Made kontovatel to rotate the car.
engine installation
it took about half a year, cars stood almost untouched. Cooked inside of the rear wings
made sand blasting equipment
in 2012 there was a strong degree
Video
http://www.youtube.com/watch?v=bphq-WgsSEwhttp://www.youtube.com/watch?v=KOhCF9TtolEcontinuation will write later
Первая часть рассказа.
Всю работу делали двоем с отцом
А теперь расказ о том, что сделано за 4 года.
мой инстаграм
работали только с отцом
куплено сцепление, и выжимная корзина "экседи" на МКПП T50.
был куплен мотор 4a-ge.
Изготовлен контователь, для вращения автомобиля.
установка двигателя
прошло около полу года, авто стояло почти не тронутым. Сварили внутренние части задних крыльев
сделал пескоструй технику
в 2012 году был сильный град
продолжение напишу позже
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 2:05 am
by mert995
Was mauled threshold
cut out
made a new threshold
the rigidity of the body
drilled
straightened and secured by welding
Ve rests on the body with rust, of course he's not rotten, but to cover all anti corrosion, so after half a year rust went on. I didn't dare. continued
the search of the compressor.
working in a garage if possible.
try to do everything efficiently for yourself why so debt
Subscribe ! my instagram "japanese.shop"
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 2:05 am
by mert995
был повтор
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 5:02 am
by mert995
made sandblasting
To be honest it is very difficult in this busy
to say dusty job , then there is nothing to say=)
Subscribe ! my instagram "japanese.shop"сделал пескоструйную обработку
Скажу честно очень трудно таким делом заниматься
сказать пыльная работка , то есть нечего не сказать=)
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 5:07 am
by mert995
Wiring
ae111
Purchased automotive wiring
the engine compartment. salon
Куплена автомобильная проводка
подкапотная. салонная
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 5:29 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 6:30 am
by mert995
INSTALL RADIATOR
well, this is how it sits now
After treatment by sand blasting the bottom from corrosion.
the bottom of the car looked like this here
then came the long-awaited moment when we covered the bottom with soil.
the Epoxy primer.
УСТАНОВКА РАДИАТОРА
ну и вот так вот он сейчас сидит
После обработки пескоструйкой дна от коррозии.
дно автомобиля выглядело вот так вот
настал тот долгожданный момент когда мы накрыли дно грунтом.
грунт Эпоксидный.
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 6:54 am
by mert995
Several layers of the soil
salon
protection
to lubricate the joints in the hind wings sealant
it was so
It happened
Coated with anti-stone chip
It's already on another day
the seams in the cabin
frame for optics
struck a white ground
[img]https://c-a.d-cd.net/1042ea4s-960.jpg
[/img]
Несколько слоев грунта
салон
промазать швы в задних крыльях герметиком
было так
так стало
Покрыл антигравием
Это уже на другой день
швы в салоне
рамки для оптики
нанесли белы грунт
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 7:17 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 7:53 am
by mert995
удалил повтор
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 7:53 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 7:59 am
by mert995
videos dyeing machine
https://youtu.be/Wn2pnbNVazc instagram "japanese.shop"
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 8:19 am
by mert995
the manufacture of the exhaust manifold
so it looks factory, under the front-wheel drive
Sketch
this is what happens=)
the real difficult task to do the exhaust manifold. someone experienced who knows=)
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 8:32 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 8:40 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 8:51 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 9:38 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 1:09 pm
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 2:52 pm
by MtLemmon86
Excellent work! Definitely keep us updated!
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 6:43 pm
by Grant
Wow that's a lot of work. Keep it up and show us the finished result!
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Tue Mar 17, 2015 8:42 pm
by Jeonsah
Great work, keep it up! crazy russians! :]
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Wed Mar 18, 2015 12:05 am
by mert995
Good time dear readers.
We started the car.
here are two videos. https://youtu.be/Tg5YC8Xt780 https://youtu.be/g7yYHKsUCoM sorry that the forum is not to post the video so
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Wed Mar 18, 2015 12:43 am
by mert995
I will try to describe as much as possible just what is done.
here are the seats, they were on the roof of the shed 4 years=)
the interior was completely washed: carpet, trim, foam seats
Two sides of the driver's seat was worn out, I had to replace them
More or less reschedules with wires
this chip switches
set the stove
washed the motor janitors
https://c-a.d-cd.net/e82ca02s-960.jpgstarted splicing wires. aa60-ae111
It's a difficult thing. I have no specialty electrics. but we did,carefully. and as needed.
Replaced the cord on the gas pedal, as the old one was short
on 14 February a Russian holiday. St. Valentine's day.
This day I spent in the garage. till about 2 am.
.
The salon after washing and sewing.
https://e-a.d-cd.net/b98ca02s-960.jpgThe salon is almost assembled.
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Wed Mar 18, 2015 1:08 am
by mert995
Brake lights, restorationthe car was purchased without stop signals.
Long sought brake lights, at that time in Russia I have not found, in Japan at the auction was not.
Somehow turned up option't remember exactly Ukraine or Belarus.
auto sawed in pieces and sold.
one stop signal was not glued, and the glass slides were on a delay=)
+ two stop signals were very dirty, about 3 hours I washed them
Since the optics was not new. there were chips, scratches, and cracks.
It was decided to revive them.
https://h-a.d-cd.net/3eede02s-960.jpgPolishing
the initial state of the stop signal
https://f-a.d-cd.net/c3ede02s-960.jpgpolishing
Rama, on the stop signal
now do the same with the second
https://f-a.d-cd.net/3dde02s-960.jpghttps://f-a.d-cd.net/f01de02s-960.jpgI think it turned out well
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Wed Mar 18, 2015 9:00 pm
by RuizXIII
Very nice!
You did good work making it look good again
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Wed Mar 18, 2015 11:53 pm
by mert995
RuizXIII wrote:Very nice!
You did good work making it look good again
Many thanks that you estimated our work =)
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Thu Mar 19, 2015 2:46 am
by mert995
Today there will be a post. This work literally the other day is finished.
Остлось slightly =)
Hello dear readers. one more board the magazine devoted to assembly of the car.
As the old cable of gas was short, other rope of gas is established.
Door glass, and moldings was bought
Here and so moldings looked
https://a-a.d-cd.net/91ecc42s-960.jpghttps://g-a.d-cd.net/71ecc42s-960.jpgpolishing
About the beginning looked so
- I established stoplights.
https://f-a.d-cd.net/291cc42s-960.jpgestablished an oven faucet
Fastenings under conducting are made. established conducting that passes in front
established an oven faucet
as the radiator not native, and is one many more, from motor ge
fastenings of a radiator in the heel remade.
this time made fastenings of a radiator in the top part
Made fastenings and fixed the block of safety locks that under a cowl.
that's all =)
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Sun Jul 26, 2015 7:43 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Sun Jul 26, 2015 7:48 am
by mert995
Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ
Posted: Sun Jul 26, 2015 7:51 am
by mert995