Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russia.

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russia.

Postby mert995 » Tue Mar 17, 2015 1:07 am

The first part of the story.
viewtopic.php?f=4&t=3564&p=96244#p96244

my instagram "japanese.shop"

All work done with his father dvoem
Now raskaz about what has been done for 4 years.



bought the clutch basket and clutch release "exedy" on MT T50.
Image

was bought by motor 4a-ge.
Image
Image
Made kontovatel to rotate the car.
Image
Image
engine installation
Image

it took about half a year, cars stood almost untouched. Cooked inside of the rear wings

made sand blasting equipment

in 2012 there was a strong degree
Video
http://www.youtube.com/watch?v=bphq-WgsSEw
http://www.youtube.com/watch?v=KOhCF9TtolE
continuation will write later

Первая часть рассказа.
Всю работу делали двоем с отцом
А теперь расказ о том, что сделано за 4 года.
мой инстаграм
работали только с отцом


куплено сцепление, и выжимная корзина "экседи" на МКПП T50.
был куплен мотор 4a-ge.
Изготовлен контователь, для вращения автомобиля.
установка двигателя
прошло около полу года, авто стояло почти не тронутым. Сварили внутренние части задних крыльев
сделал пескоструй технику
в 2012 году был сильный град
продолжение напишу позже

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 2:05 am

Was mauled threshold
Image
Image
Image
Image
cut out
Image
Image
made a new threshold
Image
Image
the rigidity of the body
Image
Image
drilled
Image
straightened and secured by welding
Image
Image
Ve rests on the body with rust, of course he's not rotten, but to cover all anti corrosion, so after half a year rust went on. I didn't dare. continued
the search of the compressor.

working in a garage if possible.
try to do everything efficiently for yourself why so debt

Subscribe ! my instagram "japanese.shop"

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 2:05 am

был повтор
Last edited by mert995 on Tue Mar 17, 2015 2:06 pm, edited 1 time in total.

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 5:02 am

made sandblasting
Image
Image
Image
Image
Image
Image
Image
To be honest it is very difficult in this busy
to say dusty job , then there is nothing to say=)

Subscribe ! my instagram "japanese.shop"

сделал пескоструйную обработку

Скажу честно очень трудно таким делом заниматься
сказать пыльная работка , то есть нечего не сказать=)

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 5:07 am

Wiring
ae111
Purchased automotive wiring
the engine compartment. salon
Image
Image
Image
Image
Image
Куплена автомобильная проводка
подкапотная. салонная

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 5:29 am

Image
Image
Image
Image
Image

Image

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image


ПОЛИУРЕТАН
Image
Image
Image
Image

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 6:30 am

INSTALL RADIATOR
Image
well, this is how it sits now
Image
Image

After treatment by sand blasting the bottom from corrosion.
the bottom of the car looked like this here
Image
Image
Image
Image
then came the long-awaited moment when we covered the bottom with soil.
the Epoxy primer.

Image
Image
Image
Image
Image
Image
Image
Image
Image

УСТАНОВКА РАДИАТОРА

ну и вот так вот он сейчас сидит

После обработки пескоструйкой дна от коррозии.
дно автомобиля выглядело вот так вот

настал тот долгожданный момент когда мы накрыли дно грунтом.
грунт Эпоксидный.

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 6:54 am

Several layers of the soil
Image
salon
Image
Image

Image
protection
Image
to lubricate the joints in the hind wings sealant
it was so
Image
Image
Image

It happened
Image
Image
Image

Coated with anti-stone chip
Image
Image
Image
Image
Image
Image
It's already on another day
Image
Image
the seams in the cabin
Image
Image
frame for optics
Image
struck a white ground
Image
Image
[img]https://c-a.d-cd.net/1042ea4s-960.jpg
[/img]


Несколько слоев грунта
салон

промазать швы в задних крыльях герметиком
было так
так стало
Покрыл антигравием
Это уже на другой день
швы в салоне

рамки для оптики
нанесли белы грунт

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 7:17 am

3 years have passed
video
https://youtu.be/uKUnAZp0aUg

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 7:53 am

удалил повтор
Last edited by mert995 on Tue Mar 17, 2015 2:04 pm, edited 1 time in total.

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 7:53 am

epoxy primer,acrylic primer
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

primer body
first gray epoxy primer
then the usual white.

Image
Image
Image
Image
Image
Image
Image
Image

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 7:59 am

videos dyeing machine
https://youtu.be/Wn2pnbNVazc
instagram "japanese.shop"

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 8:19 am

Image

the manufacture of the exhaust manifold
so it looks factory, under the front-wheel drive
Image
Sketch
Image
this is what happens=)
Image
the real difficult task to do the exhaust manifold. someone experienced who knows=)

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 8:32 am

polyurethane
Image
Image
Image
the fuel pump. 2jz-gte
Image
The gas tank. carburetor
Image
on a lathe. did flange
Image
under the puck from supriya
Image
Hole sawed electric jig saw
Image
Image
welded to the tank thread
Image
we filled up the water. Check for leaks.
Image


Image
Image
Image
Image

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 8:40 am

Image
Image
Image

fuel line supra jza80
Image
installation of the bridge
Image
Image
Image
exhaust manifold
Image
Image

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 8:51 am

the exhaust manifold.The final stage
Image
Image

spider 4.1
layout
Image
Image

Image
did flange
Image
[img]https://c-a.d-cd.net/f5f6d5cs-960.jpg
[/img]

you like? what we have done?
hung the exhaust pipe
Image
under the exhaust was done about 6 mounts
Image
Image

wrapped the entire exhaust manifold thermo tape
Image
Image
Image
Image

Image
Image

do you like it? what we have done?

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 9:38 am

Image
Image
salon carpet washed
Image
scattered wiring in the garage from ae111 Levin
Image
Image
Image
pasted interior sound insulation, rigid in two layers, gone 3-4 days

Image
Image
automotive wiring ae111
Image
Image
Image
Image

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Tue Mar 17, 2015 1:09 pm

Cool light wheels Old School
Bridgestone ZANA SPOKE 6 MADE IN JAPAN
Image
Image
Image
5 kg
Image
it is time to bring them in proper form

Image
Image
well I washed them. about 30-60 minutes on each disk
Image
Image
Soaps with various detergents,they were very greasy
Image
Then started polishing shelves
time about 4 hours on each disc
3 days is gone.
and the finish polishing for 30 minutes on the disc
Image
Image
prepared disks:
degreased, Packed in polyethylene.
Image
Image
and away we go
Image
Image
Image
3 layers of gold and 4 coats of varnish
Image
the camera does not convey the beauty=( from different angles in different color,
Image
Image
Image
beautiful
Image
Image
Image
Image

do you like it? what we have done?
You interested?
Should I continue?

MtLemmon86
Club4AG Enthusiast
Posts: 83
Joined: Fri Oct 24, 2014 8:47 am
Location: Tucson, AZ

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby MtLemmon86 » Tue Mar 17, 2015 2:52 pm

Excellent work! Definitely keep us updated!

User avatar
Grant
Club4AG Expert
Posts: 382
Joined: Wed Jan 09, 2013 8:42 pm
Location: Upstate New York

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby Grant » Tue Mar 17, 2015 6:43 pm

Wow that's a lot of work. Keep it up and show us the finished result! :)

User avatar
Jeonsah
Club4AG Expert
Posts: 401
Joined: Wed Jan 09, 2013 10:44 pm

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby Jeonsah » Tue Mar 17, 2015 8:42 pm

Great work, keep it up! crazy russians! :]
WTB Best Motoring International VHS Volume 42!

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Wed Mar 18, 2015 12:05 am

Good time dear readers.
We started the car.
here are two videos.
https://youtu.be/Tg5YC8Xt780
https://youtu.be/g7yYHKsUCoM
sorry that the forum is not to post the video so
Image
Last edited by mert995 on Wed Mar 18, 2015 1:18 am, edited 1 time in total.

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Wed Mar 18, 2015 12:43 am

I will try to describe as much as possible just what is done.

here are the seats, they were on the roof of the shed 4 years=)
Image
the interior was completely washed: carpet, trim, foam seats
Image
Two sides of the driver's seat was worn out, I had to replace them
Image
More or less reschedules with wires
Image
Image
this chip switches
Image
set the stove
Image
washed the motor janitors
https://c-a.d-cd.net/e82ca02s-960.jpg
started splicing wires. aa60-ae111
Image
It's a difficult thing. I have no specialty electrics. but we did,carefully. and as needed.
Replaced the cord on the gas pedal, as the old one was short
on 14 February a Russian holiday. St. Valentine's day.
This day I spent in the garage. till about 2 am.
Image
Image
Image
Image
Image
.
The salon after washing and sewing.
https://e-a.d-cd.net/b98ca02s-960.jpg
The salon is almost assembled.
Image
Image

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Wed Mar 18, 2015 1:08 am

Brake lights, restoration

the car was purchased without stop signals.
Long sought brake lights, at that time in Russia I have not found, in Japan at the auction was not.
Somehow turned up option't remember exactly Ukraine or Belarus.
auto sawed in pieces and sold.
one stop signal was not glued, and the glass slides were on a delay=)
+ two stop signals were very dirty, about 3 hours I washed them
Since the optics was not new. there were chips, scratches, and cracks.
It was decided to revive them.
https://h-a.d-cd.net/3eede02s-960.jpg
Image
Image
Polishing
Image
Image
the initial state of the stop signal
Image
https://f-a.d-cd.net/c3ede02s-960.jpg
polishing
Image
Rama, on the stop signal
Image
now do the same with the second
https://f-a.d-cd.net/3dde02s-960.jpg
https://f-a.d-cd.net/f01de02s-960.jpg
Image
Image
Image
Image
Image
Image
Image
Image
I think it turned out well

User avatar
RuizXIII
Club4AG Enthusiast
Posts: 167
Joined: Wed Jan 16, 2013 7:33 pm
Location: Smell Ya Later, NJ

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby RuizXIII » Wed Mar 18, 2015 9:00 pm

Very nice!
You did good work making it look good again
irony.cc

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Wed Mar 18, 2015 11:53 pm

RuizXIII wrote:Very nice!
You did good work making it look good again

Many thanks that you estimated our work =)

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Thu Mar 19, 2015 2:46 am

Today there will be a post. This work literally the other day is finished.
Остлось slightly =)
Hello dear readers. one more board the magazine devoted to assembly of the car.
As the old cable of gas was short, other rope of gas is established.
Image
Door glass, and moldings was bought
Image
Here and so moldings looked
https://a-a.d-cd.net/91ecc42s-960.jpg
https://g-a.d-cd.net/71ecc42s-960.jpg
polishing
Image
Image
About the beginning looked so
Image

Image
Image

- I established stoplights.
Image
https://f-a.d-cd.net/291cc42s-960.jpg
Image
established an oven faucet
Image
Fastenings under conducting are made. established conducting that passes in front
Image
established an oven faucet
Image

as the radiator not native, and is one many more, from motor ge
fastenings of a radiator in the heel remade.
this time made fastenings of a radiator in the top part
Image
Image
Made fastenings and fixed the block of safety locks that under a cowl.
Image
that's all =)

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Sun Jul 26, 2015 7:43 am


User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Sun Jul 26, 2015 7:48 am

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

User avatar
mert995
Club4AG Enthusiast
Posts: 76
Joined: Sat Mar 30, 2013 12:30 pm
Location: I from Russia, Siberia

Re: Carinna aa60 3a-u -T50/ 4a-ge 20v black Top Hi from Russ

Postby mert995 » Sun Jul 26, 2015 7:51 am

Image

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “OWNERS and BUILDERS”

Who is online

Users browsing this forum: No registered users and 1 guest