ONE MILD 86

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

ONE MILD 86

Postby lootbag » Sat Apr 26, 2014 6:10 am

Hey Everyone,

This is my 2nd 86, first was written off...
I have a running build log over on another local forum but thought I would share over here at Club4AG.
Just photos on this first post!

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Sat Apr 26, 2014 6:17 am

This is what has been going since late 2013 till now, the BEAMS swap.
Here is a writeup by the shop that did most of the swap for me: http://cyriousgarageworks.com/swapped-beams-3sge-ae86/

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Sat Apr 26, 2014 6:18 am

Installed the CUSCO front radius bar... loks nice
Image

Swapped out the 195/50 in front for a 225/50 to match the rear and installed the Zenki front lip
Image

Sapporokid
Club4AG Enthusiast
Posts: 133
Joined: Fri Jan 11, 2013 5:50 pm

Re: ONE MILD 86

Postby Sapporokid » Sat Apr 26, 2014 1:06 pm

Is that a rx7/ae86 rear diffuser?

looks very nice! love that beams haha

User avatar
YOTAHOLIC808
Club4AG Enthusiast
Posts: 81
Joined: Tue Jan 07, 2014 9:38 am

Re: ONE MILD 86

Postby YOTAHOLIC808 » Sun Apr 27, 2014 10:14 am

Any vids of it running? ~ Looks amazing! good work!
@_yotaholic

Oni-Roku
Club4AG Regular
Posts: 26
Joined: Fri Mar 28, 2014 1:07 am

Re: ONE MILD 86

Postby Oni-Roku » Sun Apr 27, 2014 1:44 pm

Oh man.....makes me want to build my ae86 so bad :( but I have to wait till oct
R-Rydes

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Sun Apr 27, 2014 2:51 pm

Sapporokid wrote:Is that a rx7/ae86 rear diffuser?

looks very nice! love that beams haha

Yeah it is a Shine Auto RE-Amemiya Replica for FC

YOTAHOLIC808 wrote:Any vids of it running? ~ Looks amazing! good work!

No vids yet... maybe soon?

Oni-Roku wrote:Oh man.....makes me want to build my ae86 so bad :( but I have to wait till oct

Why the long wait?

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Tue Jul 29, 2014 7:37 am

Some updates from May.
Since then, I have just been driving the car as much as I can and been to a few track days.

Replaced the HAWK HP+ with WINMAX W4 pads and went with Rota Grid Classic 9J -15 & Hankook R-S3s in 225/45-15 for the track setup.

Image
Image
Image

Really need to get an oil cooler setup going because temperatures were hitting 135 degrees after 5 hot laps.
The o-ring for the dipstick tube has a slight leak which only occurs on the track under constant high pressure.
That's about it for the problems so I am really satisfied, more lapping days to come.

Image
Image
Image

jeepy
Club4AG Regular
Posts: 35
Joined: Wed May 08, 2013 8:59 pm

Re: ONE MILD 86

Postby jeepy » Tue Jul 29, 2014 8:25 am

are you gonna be there at the cyrious garage 86 meet next week?

User avatar
saiGone
Club4AG Expert
Posts: 352
Joined: Tue Apr 08, 2014 1:42 pm

Re: ONE MILD 86

Postby saiGone » Tue Jul 29, 2014 12:44 pm

Dope zenki! Flares and diffuser make it look raw
Club 4AG member since 05 (Formally SaigonsSon)

Image

User avatar
grappletech
Club4AG Expert
Posts: 344
Joined: Sat Jan 12, 2013 12:13 pm

Re: ONE MILD 86

Postby grappletech » Tue Jul 29, 2014 7:55 pm

Nice beams swap
87 GTS Coupe stock and Super Duper Clean
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Sun Dec 14, 2014 8:09 am

86 as it sits today,
it will never be done.

Image
Image
Image

LongGrain
Moderator
Posts: 449
Joined: Fri Jan 11, 2013 10:38 pm

Re: ONE MILD 86

Postby LongGrain » Sun Dec 14, 2014 2:45 pm

What adapter did you use for your quads? Xcessive? If so did the itg plate bolt right on?

Clouds
Club4AG Expert
Posts: 415
Joined: Thu Oct 31, 2013 6:03 am
Location: Georgia

Re: ONE MILD 86

Postby Clouds » Sun Dec 14, 2014 3:41 pm

It's sooooooo nice! :) Where is a drooling emoticon when I need it?
There shouldn't be a day that goes by where you don't learn something new.

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Sun Dec 14, 2014 5:37 pm

LongGrain wrote:What adapter did you use for your quads? Xcessive? If so did the itg plate bolt right on?


Xcessive yes, and the ITG plate from SQ did work but I ended up taking off those quick release fasteners and using bolts and nuts to secure the two together.
Slightly sanded down edges to make the fit tighter as well.

Your BEAMS86 is pretty rad by the way!


Clouds wrote:It's sooooooo nice! :) Where is a drooling emoticon when I need it?


Thanks!

LongGrain
Moderator
Posts: 449
Joined: Fri Jan 11, 2013 10:38 pm

Re: ONE MILD 86

Postby LongGrain » Sun Dec 14, 2014 5:45 pm

lootbag wrote:
LongGrain wrote:What adapter did you use for your quads? Xcessive? If so did the itg plate bolt right on?


Xcessive yes, and the ITG plate from SQ did work but I ended up taking off those quick release fasteners and using bolts and nuts to secure the two together.
Slightly sanded down edges to make the fit tighter as well.

Your BEAMS86 is pretty rad by the way!


Cool, thanks. I was curious because the ITB spacing with the xcessive adapater is a little different than it is on the 20v, so I wasnt sure if the bolt holes would all line up perfect.

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Sun Dec 14, 2014 6:10 pm

LongGrain wrote:Cool, thanks. I was curious because the ITB spacing with the xcessive adapater is a little different than it is on the 20v, so I wasnt sure if the bolt holes would all line up perfect.


I believe the bolt and ITB holes lined up decently but need a tiny trim here and there.
Its been about a year since the swap, so the memory is a bit rusty.

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Thu Jun 25, 2015 3:53 pm

Back in town and starting to spend some quality time with the car.

bumper cut and wanggg for now
working on some other things
Image

Demented86
Club4AG Regular
Posts: 18
Joined: Sun Nov 16, 2014 5:03 pm
Location: Orange County

Re: ONE MILD 86

Postby Demented86 » Thu Jun 25, 2015 6:54 pm

That is one sexy corolla man!
"Life's simple. You make choices, and you don't look back."

Toy86
Club4AG Enthusiast
Posts: 63
Joined: Mon Jan 14, 2013 10:19 pm
Location: Tucson, AZ

Re: ONE MILD 86

Postby Toy86 » Fri Jun 26, 2015 1:30 pm

Great Beams swap, and great looking 86! One question, how wide are the rims you running? Also, why did you chop up ur rear bumper for? Thanks and good luck on ur following track days!

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Mon Jun 29, 2015 7:35 am

Toy86 wrote:Great Beams swap, and great looking 86! One question, how wide are the rims you running? Also, why did you chop up ur rear bumper for? Thanks and good luck on ur following track days!


15x9 -15 square setup with 225/45-15 tires
Chop the bumper for "less drag", not really, its just for the look I like.

ae86714
Club4AG Expert
Posts: 209
Joined: Mon Nov 18, 2013 1:15 pm
Location: Orange County, CA

Re: ONE MILD 86

Postby ae86714 » Mon Jul 06, 2015 11:40 am

lootbag wrote:Installed the CUSCO front radius bar... loks nice
Image


Pretty sure this is incorrectly installed...

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Tue Jul 07, 2015 3:17 pm

ae86714 wrote:Pretty sure this is incorrectly installed...


Did I? I just followed what I saw on the web.
Image

Deuce Cam
Posts: 1346
Joined: Sun Jan 13, 2013 2:41 pm
Location: AZ

Re: ONE MILD 86

Postby Deuce Cam » Wed Jul 08, 2015 10:55 am

^That's right. I also have one.

ae86714
Club4AG Expert
Posts: 209
Joined: Mon Nov 18, 2013 1:15 pm
Location: Orange County, CA

Re: ONE MILD 86

Postby ae86714 » Fri Jul 10, 2015 9:28 am

:oops: My mistake, I was thinking it was supposed to attach to the ends of the tension rods like some other styles I've seen. And now looking at the bends in the cusco bar, it doesn't even look possible to attach the way i was thinking.

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Wed Jul 22, 2015 6:14 am

ae86714 wrote::oops: My mistake, I was thinking it was supposed to attach to the ends of the tension rods like some other styles I've seen. And now looking at the bends in the cusco bar, it doesn't even look possible to attach the way i was thinking.


Haha it's alright, I could see how that gets confusing.

CAD some new wingstands
Image

Now the wing is roof height :mrgreen:
Image

Installed a fuel surge tank setup to deal with the pesky fuel cut in hard cornering
Image

Free time attack session, so I joined.
Image
Image

Got bored and attempted to make a front splitter.
Image

It is still a work in progress, need to make canards and endplates to finish the front aero.
Image

This is the front end aero setup I am aiming for.
http://i.imgur.com/FSUxvsp.jpg

Sctjaramillo
Club4AG Regular
Posts: 32
Joined: Thu Jul 23, 2015 3:06 pm

Re: ONE MILD 86

Postby Sctjaramillo » Fri Jul 24, 2015 1:18 pm

Nice build

GTS_007
Club4AG Regular
Posts: 28
Joined: Fri Jan 11, 2013 10:01 pm

Re: ONE MILD 86

Postby GTS_007 » Sat Jul 25, 2015 2:45 pm

what kind of wing is that ?

lootbag
Club4AG Regular
Posts: 36
Joined: Sat Jan 19, 2013 7:24 am

Re: ONE MILD 86

Postby lootbag » Mon Jul 27, 2015 8:54 am

GTS_007 wrote:what kind of wing is that ?


Should be a Voltex Type 2 1600mm.