Has anyone ever used or heard of Speed Master Racing? http://www.smr2u.com/ ?
They look like they have a good selection of all sorts of 4age goodies, especially an ITB kit and a sweet looking high-rise header for rhd ae86s.
Only thing, they're based out of Malaysia ........
Speed Master Racing
Speed Master Racing
[I have no idea what I'm doing]
_____________________
instagram: @dacobjurbin
_____________________
instagram: @dacobjurbin
Re: Speed Master Racing
Was on here quite a bit a couple of years ago....
viewtopic.php?f=22&t=16966
... but I don't recall seeing him on recently.
Cheers... jondee86
viewtopic.php?f=22&t=16966
... but I don't recall seeing him on recently.
Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
- oldeskewltoy
- Club4AG MASTER
- Posts: 2180
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Speed Master Racing
I've seen him on facebook... you can't beat his cost for used ITBs.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Speed Master Racing
I bought an intake manifold with a TB from him pretty recently. Well made and works great. LMK if you want to see any pictures or anything. The guy is very nice and responds fairly quickly with any questions or concerns.
Re: Speed Master Racing
Thanks fellas!
Anytime I see something that's coming from Malaysia I try to stay clear of it, but this guy might be the only exception.
This header looks too sick.
Seriously considering buying their Version 2. Stainless steel, tig welded, etc. And I like how they have a 1.6 inch runner diameter. That's the same size Toda uses on their headers, only difference is the collector diameter but thats not a big deal.
And then of course there's the ITB conversion kit ...
... this dude might take all my money.
Anytime I see something that's coming from Malaysia I try to stay clear of it, but this guy might be the only exception.
This header looks too sick.
Seriously considering buying their Version 2. Stainless steel, tig welded, etc. And I like how they have a 1.6 inch runner diameter. That's the same size Toda uses on their headers, only difference is the collector diameter but thats not a big deal.
And then of course there's the ITB conversion kit ...
... this dude might take all my money.
[I have no idea what I'm doing]
_____________________
instagram: @dacobjurbin
_____________________
instagram: @dacobjurbin
Re: Speed Master Racing
cant beat the price on that either. Apparently they have a huge ae86 community in malaysia. I was looking at the guys facebook posts from some of their car meets. He keeps adding new stuff to his store too lol. When I purchased the intake manifold from him he barely had anything up there at all.
Re: Speed Master Racing
some 'quality looking' stuff right there
Personally I'd look for results before diving in
performance-to-dollar ratio usualy very low on small displacement normally aspirated street setups
...get ready for; the noise, narrow/peaky powerplant, header heat, etc.
Personally I'd look for results before diving in
performance-to-dollar ratio usualy very low on small displacement normally aspirated street setups
...get ready for; the noise, narrow/peaky powerplant, header heat, etc.
Re: Speed Master Racing
jinx wrote:some 'quality looking' stuff right there
Personally I'd look for results before diving in
performance-to-dollar ratio usualy very low on small displacement normally aspirated street setups
...get ready for; the noise, narrow/peaky powerplant, header heat, etc.
for sure ... this is more of me dreaming than anything Lol.
[I have no idea what I'm doing]
_____________________
instagram: @dacobjurbin
_____________________
instagram: @dacobjurbin
Re: Speed Master Racing
I've bought throttle bodies from him that he waterjetted. They were awesome. He's a solid guy and shipping is usually a week and a half to 2 and a half weeks. As far as results, follow his IG, he has consistently put together 200+ HP 4AGs NA and that is not an easy thing to do. I haven't used his header but I'm sure it is a decent piece for the price.
Re: Speed Master Racing
He seems like a stand up guy. Anybody deal with them recently?
IG: profdens
IG Store: dsspeedshop
IG Store: dsspeedshop