Page 2 of 2
Re: my DIY 20v into an 86 write-up
Posted: Fri Oct 30, 2015 6:21 am
by morgan
yes, if you swap to all BT electronics.
ecu, map sensor, iat sensor, BT engine harness merged with 86 harness(see wiring section or buy one)
...and thanks
Re: my DIY 20v into an 86 write-up
Posted: Sun Nov 29, 2015 1:51 pm
by allencr
Very good Pics & Words. Thanks. Just skimmed and I'll really have to really read it fully & the Moto-P epic saga again.
Hows the fork.
Re: my DIY 20v into an 86 write-up
Posted: Mon Jan 18, 2016 10:12 am
by hachirokufan
saiGone wrote:hachirokufan wrote:Probably a stupid question buuuuut I want to clarify something that's been bugging me about this swap. For someone with an SR5, can someone wire the engine harness' so that you don't have to rewire the whole damn car?
You will still need to add wires for a fuel pump going to the back as well as under-dash. So no? IMO
Bump from the dead!
Got in touch with Tweak'd performance, and the harness they provide comes with these wires. So anyone with an SR5 can be plug and play without rewiring the whole car
Re: my DIY 20v into an 86 write-up
Posted: Mon Aug 29, 2016 11:02 am
by jpainbringer
Wonderful write up. With your help, I was able to achieve this...
https://youtu.be/krW4WH3U2cU
Re: my DIY 20v into an 86 write-up
Posted: Fri Sep 02, 2016 8:52 am
by morgan