looking for a set of 4AGZE cams.
thanks!
WTB - 4AGZE cams
-
- Club4AG Expert
- Posts: 345
- Joined: Thu Jun 20, 2013 4:08 am
Re: WTB - 4AGZE cams
I have some red top cams and blue top cams available, but in UK.
Re: WTB - 4AGZE cams
red top, blue top? are those SC cams? didn't know there were two colors / variants... but anyway, UK is too far away for me. i'm in CA, USA...
-
- Club4AG Expert
- Posts: 345
- Joined: Thu Jun 20, 2013 4:08 am
Re: WTB - 4AGZE cams
Actually the red top cams are slightly longer with a slightly higher lift.
I thought 4AGZE shared their cams with the 4AGE red top- obviously wrong. Sorry about that. By the way I've recently sent some Valve Springs to USA and it only cost $39...
Edit- the 1989 MR2 camshafts share the same part number as the 1989 4AGZE MR2.
I thought 4AGZE shared their cams with the 4AGE red top- obviously wrong. Sorry about that. By the way I've recently sent some Valve Springs to USA and it only cost $39...
Edit- the 1989 MR2 camshafts share the same part number as the 1989 4AGZE MR2.
Re: WTB - 4AGZE cams
interesting... we originally had '88 SC cams in the engine and they completely gave out at 6000-6500rpm. just nothing after that. replaced them w/ some random NA cams, i think 85,86. power to redline then. i want to go back to the SC so we have a bit more grunt AND we don't have the desire to rev to redline... it turns out in Lemons racing that toyota's in general and MR2's in specific are "blow - upity" we've killed two motors and so more mid range and less redline certainly can't hurt...
i know i know. weird logic. but the SC cams seem like a potentially better solution than a rev-limiter and about the same cost.
i know i know. weird logic. but the SC cams seem like a potentially better solution than a rev-limiter and about the same cost.