Page 2 of 2

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Tue Sep 13, 2016 4:51 pm
by NonStopTuning
For those who have inquired recently... YES! These little brackets are in stock and ready to rock :mrgreen:

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Tue Oct 25, 2016 8:11 am
by NonStopTuning
These little things have been popular lately. I love how people come up at events and say, "this is one of those little must haves for those of us who want to keep the 4AG alive and going in the 86."

We have a handful in stock and ready to rock, for anyone who may need one.

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Tue Nov 15, 2016 11:07 am
by NonStopTuning
In stock for the holidays!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Thu Nov 17, 2016 10:15 am
by Deuce Cam
Can your bracket be used like this?:

Image

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Nov 21, 2016 10:21 am
by NonStopTuning
Image

I suppose it could, but why not use it the way everyone else seems to be doing? Our design allows customers to ditch the old OEM bracket... many of which have/will crack over time and become useless anyway. Either way, I think it would work.

Best of luck!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Thu Nov 24, 2016 8:44 am
by Deuce Cam
I only want one for ease of use in regard to belt tension (one person using a pry bar on oem setup is ridiculous, plus intake has to come off...)

In my mind the oem steel bracket should be stronger than an aluminum turnbuckle with small fasteners (heims), althouth I doubt it really matters either way.

If the product can be used both ways it may broaden the appeal. Any chance you could test it out?

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Thu Nov 24, 2016 11:23 am
by NonStopTuning
I understand your reasoning, but the NST bracket has proven to be strong and durable for long term use. In fact, most people buy the NST bracket after their OEM piece has cracked or broken, and wish they had purchased the NST piece sooner. We've been offering this piece since 2010 and our customers seem to be very happy with them. We've never seen any reports of failure with the NST alternator bracket.

Thanks again, best of luck with all your projects :)

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Dec 05, 2016 9:09 am
by NonStopTuning
Thank you all for the continued support :)

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Tue Jan 03, 2017 2:42 pm
by NonStopTuning
Happy New Year Everyone!!!

Thank you all for the continued help and support!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Tue Jan 10, 2017 10:02 am
by NonStopTuning
These little things have been very popular items in our catalog recently! Anyone have photos to share of your setups? We'd love to see your engines!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Jan 16, 2017 12:19 pm
by NonStopTuning
Any of our recent customers have any new install photos and/or reviews to share?

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Sun Jan 22, 2017 1:33 pm
by CloudStrife
Would you guys be interested in making lightweight Idler pulley brackets?

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Sun Jan 22, 2017 5:52 pm
by NonStopTuning
CloudStrife wrote:Would you guys be interested in making lightweight Idler pulley brackets?


Possibly, depending on demand and support from the community.

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Jan 23, 2017 1:28 am
by CloudStrife
Well, I guess this post could put it out there. I was going to cut down mine since It came with P/S.

I think there would be good interest in it as it cleans up the bay even more.

Guess we'll see. Thanks for being open

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Thu Jan 26, 2017 12:32 pm
by NonStopTuning
Thank you!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Wed Feb 15, 2017 2:03 pm
by NonStopTuning
Image

Thank you all for the recent support!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Fri Apr 07, 2017 1:38 pm
by NonStopTuning
Thank you guys for the recent support.

Much appreciated!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Thu Apr 27, 2017 3:31 pm
by NonStopTuning
Have one of these little guys on your 4AG? Feel free to post pics!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Fri May 05, 2017 11:55 am
by NonStopTuning
Thank you guys for the recent inquiries and orders. And yes, these little pieces are in stock!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Sep 18, 2017 3:35 pm
by NonStopTuning
We've received a few inquiries asking about availability on these little brackets.

YES! They are IN STOCK and ready for shipping!!

:mrgreen:

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Oct 23, 2017 11:50 am
by NonStopTuning
These are IN STOCK and available!!!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Thu Nov 02, 2017 10:41 am
by NonStopTuning
Thank you for the recent inquiries and orders, ladies and gents!

YES, these little guys are in stock!!

:)

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Thu Nov 02, 2017 3:43 pm
by CloudStrife
lightweight Idler pulley brackets?

;)

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Nov 13, 2017 2:34 pm
by NonStopTuning
hmmm.... 8-)

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Apr 23, 2018 1:31 pm
by NonStopTuning
NST Alternator Brackets are IN STOCK again!

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Tue Jun 12, 2018 9:54 am
by NonStopTuning
Image

86,000,000 thanks for all the inquiries and orders recently.

YES, these little brackets are in stock and ready for shipping!

:mrgreen:

Re: NonStopTuning Aluminum Alternator Brackets

Posted: Mon Aug 06, 2018 9:36 am
by NonStopTuning
:D HAPPY 86 DAY EVERYONE :D