JDM block w/oil squirters

sirdeuce
Club4AG Pro
Posts: 589
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

JDM block w/oil squirters

Postby sirdeuce » Mon Sep 25, 2017 9:12 am

Selling a few things here. Plus shipping. Or pick up if local. Located Pismo CA area.
JDM block from a high comp 4AGE with oil squirters, standard bore. $250
40mm crank and rods, rods have 18mm wrist, comes with ARP rod bolt set(uninstalled). $150
Light weight flywheel. $200
Take all for $500
Also have a set of
40mm rods with pistons attached. $40
Aftermarket high comp 20mm wrist pistons, .5mm/.020" over, no rings. $25
Aftermarket 18mm standard pistons with NPR rings. $45
NPR 1.5/1.5/2.5 .5mm/.020" over rings. $25
Total seal rings 1.5/1.5/2.5 standard. $50
200mm flywheel $40
One shot, one kill.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
original menace
Club4AG Enthusiast
Posts: 82
Joined: Mon Jan 14, 2013 9:20 pm

Re: JDM block w/oil squirters

Postby original menace » Tue Nov 07, 2017 7:15 pm

i'm interested in the crank


Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 3 guests