High compression pistons cam head kit

Idriveslow
Posts: 2
Joined: Mon May 22, 2017 7:51 pm

High compression pistons cam head kit

Postby Idriveslow » Wed May 24, 2017 9:41 am

So I have this 12.5-13:1 high compression kit built by a 1600 class racer. The rings have significant blow by but it was fun for the 6ish hours I ran it in my sand rail. Lobes set at 112* power opened up like crazy around 6000-6800 tons of fun. Looks like mild porting on the head.

Pistons are je pistons pn 646478 require ring kit jg1004-3287
Cams are a 28 grind by webcam.
Buckets are shimmed and look great.
Head looks to have material taken off
I ran 110 in it just to be safe.
Pistons look great, one has superficial scratching from a chip in the cylinder sleeve.

I'm looking for 700 unless it's too under priced or over priced. Just let me know what offers you have! I'm in Torrance 90501. If u want to trade me your stock 4age for this I totally would do a straight trade. I can't afford to run 110 and climbing dunes is hard with high end power I need the band lowered.



https://m.imgur.com/a/nd5q9

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
chohdog
Club4AG Enthusiast
Posts: 145
Joined: Thu Jan 10, 2013 10:15 pm

Re: High compression pistons cam head kit

Postby chohdog » Wed Jun 07, 2017 5:11 pm

Where are you located?

Idriveslow
Posts: 2
Joined: Mon May 22, 2017 7:51 pm

Re: High compression pistons cam head kit

Postby Idriveslow » Thu Jun 08, 2017 7:17 am

In Torrance, ca 90501

User avatar
chohdog
Club4AG Enthusiast
Posts: 145
Joined: Thu Jan 10, 2013 10:15 pm

Re: High compression pistons cam head kit

Postby chohdog » Mon Jun 12, 2017 9:47 am

Can you please PM me or send me your contact info? I have stock 4AG stuff to trade. Maybe we can make some sort of deal. I'm in Orange County.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 9 guests