Page 1 of 1

ColtCams Tri-Flow Camshafts for 4AGE 16V

Posted: Wed Apr 26, 2017 9:05 pm
by Highdensity
Lightly used (original owner had installed/ran them but had trouble timing them, I never installed them). Changed plans for my build and don't need these any more. I'd love to see these on a dyno. $450 plus shipping. Pics via email.

Re: ColtCams Tri-Flow Camshafts for 4AGE 16V

Posted: Thu Apr 27, 2017 8:50 pm
by aukword1
what kind of specs are on these cams? lift and overlap wise.

Re: ColtCams Tri-Flow Camshafts for 4AGE 16V

Posted: Thu Apr 27, 2017 9:22 pm
by Highdensity
Intake has a primary and secondary lobe, 268*/8.33mm lift + 261*/8.28mm lift; exhaust is 268*/8.33mm lift. If you do a search for 'NST Triflow', they put the cams in a bigport and did some dyno runs back to back with the stock set.

edit: here's the linky--https://nonstoptuningusa.com/2010/03/07/nst-toyota-4ag-ae86-tri-flow-camshaft-dyno-testing/

Re: ColtCams Tri-Flow Camshafts for 4AGE 16V

Posted: Sat Apr 29, 2017 9:30 am
by Highdensity
No one likes dyno proven power?

Re: ColtCams Tri-Flow Camshafts for 4AGE 16V

Posted: Sat Apr 29, 2017 9:37 pm
by Rogue-AE95
I've considered getting these cams before. I changed my plans to going 7A and turbo, and wonder how these would fare.

Re: ColtCams Tri-Flow Camshafts for 4AGE 16V

Posted: Sat Apr 29, 2017 11:05 pm
by Highdensity
Sale pending....

Re: ColtCams Tri-Flow Camshafts for 4AGE 16V

Posted: Tue May 02, 2017 7:48 pm
by Highdensity
These done been Sold!