Reman 4AGE head with some MILD port work - $595

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1588
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Reman 4AGE head with some MILD port work - $595

Postby oldeskewltoy » Wed Apr 05, 2017 2:01 pm

Image
Image
Image

I have a complete professionally rebuilt largeport 4AGE head that comes with some MILD port work. Head comes with new viton rubber valve seals, 3 angle valve job, and resurfaced. This head is bolt on ready!

more photos here - https://portland.craigslist.org/mlt/pts/6075737627.html


I will ship at your expense.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
mad_86
Club4AG Expert
Posts: 271
Joined: Fri Jan 25, 2013 3:40 pm
Location: Socal

Re: Reman 4AGE head with some MILD port work - $595

Postby mad_86 » Wed Apr 05, 2017 8:30 pm

Looks good!!!!

toycort
Posts: 7
Joined: Wed Jan 08, 2014 6:54 pm

Re: Reman 4AGE head with some MILD port work - $595

Postby toycort » Thu Apr 06, 2017 9:35 am

New valves? New guides? what are the lifter to head clearances? How much lift will the valve train handle?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1588
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Reman 4AGE head with some MILD port work - $595

Postby oldeskewltoy » Thu Apr 06, 2017 12:40 pm

toycort wrote:New valves? New guides? what are the lifter to head clearances? How much lift will the valve train handle?


Image

Original valves, they were re-ground - intake valve margins all @ .70+ mm, exhaust valve margins all @ 1.0+mm.
Original valve guides - all within FSM specifications.

The head uses stock valve springs and will handle upto 8mm of VALVE lift (bit less then cam lift).

The lifter/head clearance averages between .02mm, and .04mm
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


toycort
Posts: 7
Joined: Wed Jan 08, 2014 6:54 pm

Re: Reman 4AGE head with some MILD port work - $595

Postby toycort » Fri Apr 07, 2017 1:41 pm

Have you cc'd the chambers?

toycort
Posts: 7
Joined: Wed Jan 08, 2014 6:54 pm

Re: Reman 4AGE head with some MILD port work - $595

Postby toycort » Sun Apr 09, 2017 9:00 am

how much to ship to 90631?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1588
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Reman 4AGE head with some MILD port work - $595

Postby oldeskewltoy » Sun Apr 09, 2017 6:48 pm

I have not CC'd chambers, the head was standard before I got it (measured 116mm thick), and I had it machined .002".

Shipping to your postal code will be $66.00 without extra insurance. Shipping with insurance and the cost will be $76.00

Email me oldeskewltoy@yahoo.com and we can finalize the sale
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1588
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Reman 4AGE head with some MILD port work - $595

Postby oldeskewltoy » Mon Apr 10, 2017 12:03 pm

This head is SOLD
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 1 guest