BNIB Asin 200mm clutch/pressure plate

GZE_RA21
Club4AG Enthusiast
Posts: 76
Joined: Sat Jan 16, 2016 6:19 pm
Location: San Clemente, California
Contact:

BNIB Asin 200mm clutch/pressure plate

Postby GZE_RA21 » Mon Jan 09, 2017 7:32 pm

Got a brand new never installed 200mm Aisin clutch and pressure plate for 4AGE 16v, box is open but parts are brand spanking new.

Ordered the wrong one from rock auto and didnt realize til now and it's been too long to return them.

Comes in clutch kit box but there is no throw out bearing or pilot bearing included, only clutch/pressure plate/alignment tool

Willing to ship at your expense, PM or email for details etc. Thanks!

Cost me $90, asking $60

Pjerroldjones@yahoo.com

Image

Image

Image

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


previadrifter
Club4AG Expert
Posts: 257
Joined: Sun Feb 03, 2013 2:30 pm

Re: BNIB Asin 200mm clutch/pressure plate

Postby previadrifter » Mon Jan 09, 2017 11:12 pm

What does it fit?

GZE_RA21
Club4AG Enthusiast
Posts: 76
Joined: Sat Jan 16, 2016 6:19 pm
Location: San Clemente, California
Contact:

Re: BNIB Asin 200mm clutch/pressure plate

Postby GZE_RA21 » Wed Jan 11, 2017 8:24 am

Works for - a 200mm flywheel, OEM size flywheel for early 4AGE, AE86 with 16v large port, mr2 n/a with 16v large port

Not sure about the 8v 4AC....

Will not work for - red top/small port, silver top 20v, blacktop 20v, 4AGZE supercharged. The OEM flywheel for those are larger than 200mm.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 1 guest