FS unassembled performance block

sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

FS unassembled performance block

Postby sirdeuce » Sun Jun 26, 2016 11:38 am

[img][IMG]http://i895.photobucket.com/albums/ac155/walinggamit/DSCN1148_zpsgwzvmvgn.jpg[/img][/img]Going with a 7AGE, selling my 4AGE block. machined and balanced assy. with bearings. 20v block and crank. Crower 'I' beam rods. 81.5 CP pistons. 7 lb TODA 200mm flywheel. Located in central CA, San Luis Obispo area. Prefer pick-up, lots of heavy parts. $1850.

This is an unassembled, unused set of parts. Pistons, rods and bearings are NEW! Flywheel is used and clutch is new. Pic shows internals and flywheel. Block is still in storage and the crank is mummy wrapped.
Last edited by sirdeuce on Fri Jan 27, 2017 10:16 pm, edited 3 times in total.
One shot, one kill.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1588
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: FS unassembled performance block

Postby oldeskewltoy » Sun Jun 26, 2016 1:55 pm

you might want to include the dome/crown volume so people can calculate a static CR....
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: FS unassembled performance block

Postby sirdeuce » Mon Jun 27, 2016 10:08 am

Ok, good point. Pistons are for 16 valves, flat top with 1.191 compression height. Valve pockets are intake -.28cc and exhaust -.23cc which is -1.02cc. . Forgot to say it had ARP main studs as well.
One shot, one kill.

KameleonK
Club4AG Regular
Posts: 18
Joined: Sat Jan 12, 2013 7:29 pm

Re: FS unassembled performance block

Postby KameleonK » Wed Jun 29, 2016 9:43 am

Pm you....

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: FS unassembled performance block

Postby sirdeuce » Wed Jun 29, 2016 8:38 pm

Updated info.
One shot, one kill.

sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: FS unassembled performance block

Postby sirdeuce » Sun Jul 10, 2016 8:02 pm

This would be a bullet proof bottom end. Well over 2k invested.
One shot, one kill.

sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: FS unassembled performance block

Postby sirdeuce » Fri Jul 22, 2016 7:41 pm

Block is from a 20v 4age. Pistons are CP, forged flat top, 81.5mm. Still available.
One shot, one kill.

sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: FS unassembled performance block

Postby sirdeuce » Sun Sep 04, 2016 3:05 pm

Still available
One shot, one kill.

Alex170984
Club4AG Expert
Posts: 250
Joined: Thu Jun 20, 2013 4:08 am

Re: FS unassembled performance block

Postby Alex170984 » Sun Sep 11, 2016 12:47 pm

How much for the Pistons?

sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: FS unassembled performance block

Postby sirdeuce » Sun Sep 11, 2016 1:06 pm

Selling as a set. If I sell the pistons separately then the block is basically worthless. As it is I'm letting it go for hundreds less than it cost me. Don't want to throw away any more. If I don't sell it then I'll use it in something else. I don't need to sell any of it.
One shot, one kill.

sirdeuce
Club4AG Pro
Posts: 588
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: FS unassembled performance block

Postby sirdeuce » Fri Jan 27, 2017 10:17 pm

Still have this if anyone is interested.
One shot, one kill.

DannyN2
Posts: 5
Joined: Sat Feb 04, 2017 12:10 pm

Re: FS unassembled performance block

Postby DannyN2 » Sun May 28, 2017 10:00 am

Interested could you please message me number where I can reach you

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 3 guests