"New" 4AGE: high comp, w/OST-032 ported head

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

"New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Sat Jan 23, 2016 8:06 am

As title states... I have a completely re-manufactured high comp 4AGE with OST-032 ported head... and it comes with its own delivery device - a 1987 FX16!!

Image

I bought this last spring when I believed my wife and I were moving from Portland to Eugene, so I would have a "commuter" going from Eugene to Portland. Those plans fell flat, we stayed in Portland, so I have no need for this special FX16.

This is a genuine FX16... just not an FX16 GTS... so this is far more stealthy


When I bought the FX it had a bad engine... cyl 3 had ingested a spark plug electrode and did significant damage to both the head and the block. So a new engine was built........


Now to the "New" engine:

Image

7 rib none squirter block, 40mm rod journal crank, 40/18 rods modified to take a press fit 20mm wrist pin, 81.5mm aftermarket 10.3 to one pistons, new Toyota rod bolts/nuts, short block assembled by Loynings, Cometic .036 head gasket, stock 87 and earlier cams, new Toyota (OST ported) oil pump, AEM adjustable timing pulleys, and an OST ported largeport head with a Loynings valve job... All Toyota gaskets except Cometic .036" head gasket

link to head build - http://club4ag.com/forums/viewtopic.php?f=7&t=15894

edit - car/engine in Portland, Oregon

$3500 or best offer...
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Mon Feb 15, 2016 12:58 pm

bump this beast
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

casket77
Club4AG Regular
Posts: 34
Joined: Mon Jan 21, 2013 1:47 pm

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby casket77 » Wed Mar 02, 2016 6:47 pm

PM Sent...

Garage7RP
Club4AG Enthusiast
Posts: 59
Joined: Fri Jan 11, 2013 9:58 pm
Location: Rosewood, Ca.

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby Garage7RP » Thu Mar 03, 2016 9:33 am

Will it pass CA smog?

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Fri Mar 04, 2016 1:21 pm

got PM... responded...

Will it pass Ca smog.... there is no reason why it shouldn't.... but the reg/emissions are still good in Oregon till October... so I haven't checked.

Grunt my AE95 sedan popped another head gasket so I've been using this for a bit.... it pulls well from 2500, all the way to redline.... The car itself has a few flaws.... clock and fuel gauge inop, rear hatch, or tail lamps leak, a few squeaks and rattles, but she drives straight, and brakes straight.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Wed Mar 23, 2016 12:32 pm

I should raise the price..........

4th gear pull... - 120.5 whp 109#/ft........ and look at that low end :shock:

Image

I even have video - :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Deuce Cam
Posts: 1275
Joined: Sun Jan 13, 2013 2:41 pm
Location: AZ

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby Deuce Cam » Wed Mar 23, 2016 1:31 pm

This thing is so legit. I'm really surprised it hasn't sold yet.

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Wed Mar 30, 2016 9:19 am

http://ost.ebeans.ch/albums/userpics/10001/Skippy_dyno_120hp.mp4 - horsepower on left dial, torque on right :mrgreen:
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

oldae82
Club4AG Enthusiast
Posts: 82
Joined: Sun Apr 07, 2013 5:38 pm

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldae82 » Mon Apr 11, 2016 6:17 pm

Can you give me some pics on the body and interior? A/C and etc. working? Manual trans?

oldae82
Club4AG Enthusiast
Posts: 82
Joined: Sun Apr 07, 2013 5:38 pm

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldae82 » Mon Apr 11, 2016 6:17 pm

Can you give me some pics on the body and interior? A/C and etc. working? Manual trans?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Tue May 03, 2016 4:39 pm

oldae82 wrote:Can you give me some pics on the body and interior? A/C and etc. working? Manual trans?


apologies didn't see your request....

no A/C. Manual trans... does grind on occasion going into 3rd gear

as to pics... these taken today....

Image

Image

Image

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
InitialB
Club4AG Enthusiast
Posts: 137
Joined: Wed Feb 20, 2013 8:58 pm
Location: Torrance, CA
Contact:

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby InitialB » Tue May 03, 2016 9:17 pm

My god OST... This thing is in really good shape. GLWS. Wish I had 3k and a plane ticket up there.

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Tue May 31, 2016 7:34 am

bump... still available... still pulls like OX ;)
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Fri Oct 21, 2016 2:51 pm

I DON'T want to re-register and re-insure... email me offers........... oldeskewltoy@yahoo.com
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
Rogue-AE95
Club4AG Expert
Posts: 381
Joined: Thu Jan 10, 2013 4:03 pm
Location: Tampa Bay, FL

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby Rogue-AE95 » Fri Oct 21, 2016 6:54 pm

If I didn't live on the other side of the country, and already have a 3rd car to use for my daily driver...
'88 Corolla All-Trac

taroroot
Club4AG Enthusiast
Posts: 91
Joined: Mon Jan 14, 2013 10:04 pm

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby taroroot » Sun Oct 23, 2016 1:58 pm

Dang, I just dropped almost that much to rebuild just the 20V in mine, and my body's quickly rusting now!
I actually prefer the FX16 to the GTS for the stuff I do, auto and rally-X. Good luck!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Fri Jan 27, 2017 9:11 am

bump.........
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

MtLemmon86
Club4AG Enthusiast
Posts: 83
Joined: Fri Oct 24, 2014 8:47 am
Location: Tucson, AZ

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby MtLemmon86 » Thu Mar 23, 2017 11:16 pm

Private message sent.

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1594
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: "New" 4AGE: high comp, w/OST-032 ported head

Postby oldeskewltoy » Fri Mar 24, 2017 3:24 pm

MtLemmon86 wrote:Private message sent.



replied......


shipping this any other way then using the shell to "get it to you"... isn't likely to happen.

From a shippers standpoint this is a used engine carrying "harmful" chemicals (oil and coolant), as such most shippers will not take the engine on its own.



"get it to you" - the car can be driven, it has some flaws... but the car is road capable. The only other way I know is to ship the whole car... as in using a car transporter.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “4A-GE Engine Parts”

Who is online

Users browsing this forum: No registered users and 4 guests