Partout (AE86/Cressida) Updated 2/9/17

GreenLantern
Club4AG Enthusiast
Posts: 54
Joined: Wed Jan 09, 2013 8:55 pm

Partout (AE86/Cressida) Updated 2/9/17

Postby GreenLantern » Sun Jan 22, 2017 11:30 am

https://sfbay.craigslist.org/eby/pts/5996689904.html

Suspension parts below are for X7 Cressida but will fit other Toyotas too: Celica, other Cressidas, Supra, etc.

PAIR (2) Work meister S1 15x9 -15 4x114 - 2 small bends on one wheel, repairable , but still hold air
PAIR (2) Falken Azenis 205/50/15 BRAND NEW $200 (Save on shipping/tax from Tire Rack)
PAIR (2) Appliance Mesh 14x7 unknown offset $150
BC Coilovers for mx73 Cressida (no rear shocks) - $450
T3 NRCA for mx73 Cressida - $100
T3 angle knuckles for mx73 Cressida - $100
mx63 LONG lca for mx73 Cressida w/ newish balljoints (These are 365mm long, 65mm longer than AE86 lca, and about 50mm longer than stock mx73 lca - $75

AE86 T3 quad caliper bracket - w/ one pair S13 calipers $275
AE86 gt-s front seats (black and very clean) $350
AE86 JDM steering wheel (very clean) $200
AE86 Air Conditioning Complete (Make offer)
AE86 P/S pump/lines etc. (Make offer)
AE86 SR5 drum rear end complete (Make offer)


1JZ-GTE non-vvti ECU (may have bad capacitors) $40
1JZ-GTE igniter $50 each
326 power wing SOLD
PBM hydro with Wilwood dual caliper reservoir $120
Custom Stainless steel lines for hydro (run from hydro back to brakes with T) $50 (cost me $180)
Autometer 5" tachometer $50
Water temp gauge (mechanical w/ sensor) $30

In search of:
AE86: NRCAs, Buddy Club seat bracket (Passenger Side), Traction Brackets, Aftermarket Sway Bars, Manual rack, Rear springs ~6k, 4age exhaust & manifold, Front/rear jdm bumpers

Image20170209_185746 by roushman90, on Flickr
Image20170209_185150 by roushman90, on Flickr
Image20170209_185139 by roushman90, on Flickr
Image20170209_185128 by roushman90, on Flickr
Image20170209_185113 by roushman90, on Flickr
Image20170209_185104 by roushman90, on Flickr
Image20170209_184522 by roushman90, on Flickr
Image20170209_184502 (1) by roushman90, on Flickr
Image20170209_184442 by roushman90, on Flickr
Image20170209_184424 by roushman90, on Flickr
Image20170209_184348 by roushman90, on Flickr
Last edited by GreenLantern on Fri Feb 10, 2017 8:35 am, edited 7 times in total.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


GreenLantern
Club4AG Enthusiast
Posts: 54
Joined: Wed Jan 09, 2013 8:55 pm

Re: 1JZ Corona partout (Some ae86/cressida/etc)

Postby GreenLantern » Tue Jan 31, 2017 4:09 pm

Bump, pbm hydro dual caliper and stainless lines still available along with 326 power wing, Autometer 5" tachometer

GreenLantern
Club4AG Enthusiast
Posts: 54
Joined: Wed Jan 09, 2013 8:55 pm

Re: 1JZ Corona partout (Some ae86/cressida/etc)

Postby GreenLantern » Mon Feb 06, 2017 8:00 am

Bump, need this stuff gone to fund new build! =)

sterae86
Club4AG Regular
Posts: 10
Joined: Thu Mar 21, 2013 4:33 pm

Re: Cressida & Ae86 partout (Some ae86/cressida/etc)

Postby sterae86 » Mon Feb 06, 2017 10:54 pm

Want to part with the supra axle shafts ?

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


GreenLantern
Club4AG Enthusiast
Posts: 54
Joined: Wed Jan 09, 2013 8:55 pm

Re: Cressida & Ae86 partout (Some ae86/cressida/etc)

Postby GreenLantern » Wed Feb 08, 2017 12:59 pm

sterae86 wrote:Want to part with the supra axle shafts ?


Rear end is pending trade, mainly interested in swapping for a 6.7" gt-s complete housing w/ LSD which would be about equal in value to my rebuilt condition 7.5".

If the trade falls through, and no one else is willing to swap for it, then I will sell the entire thing outright.

GreenLantern
Club4AG Enthusiast
Posts: 54
Joined: Wed Jan 09, 2013 8:55 pm

Re: Partout (AE86/Cressida) Updated 2/9/17

Postby GreenLantern » Fri Feb 10, 2017 8:36 am

Photos of gt-s seats and jdm wheel added, see bottom of original post for stuff I will trade for!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “AE86 Parts & Accessories”

Who is online

Users browsing this forum: Bing [Bot] and 5 guests