AE86 parts, Brakes, Pulleys, ect

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

AE86 parts, Brakes, Pulleys, ect

Postby Autohaus_Z » Sun Oct 09, 2016 2:47 pm

T50 Syncros. Brand new, USA Made 5 pieces set. I use these for all my rebuilds $90 shipped in the USA
Image
T50 Input needle bearings (12 needed) $20
Image
P/S inner tie rods. Very good, zero slop. Same length, but one socket is longer than the other (Production difference?). $20
Image
Image
GTS rear caliper brackets (dust shields slightly trimmed) $40
Stock top hats $10
NST underdrive FWD/20v water pump and p/s pulley $20 each
Image
USDM Zenki Grill. All tabs intact $40 shipped
Image
Factory rod bearing (Size 3) $5
T3 Heim joints x4 $60
Image
T50 tailshaft/extension housing bushing (none left in the USA) $100
Image
T50 gasket kit (Paper gaskets only!) $10 shipped
Image


I also carry a lot of new and used T50 transmission parts! Feel free to inquire!

Located San Jose, CA.
Email or call/txt
xearthwindandfirex@yahoo.com
four zero eight 781-one 191
Thanks!
Last edited by Autohaus_Z on Mon Aug 21, 2017 8:49 pm, edited 30 times in total.
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Ae86 Parts

Postby Autohaus_Z » Fri Oct 14, 2016 8:18 pm

Bump. Camber plates sold.
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Ae86 misc, Springs, Interior, Gaskets

Postby Autohaus_Z » Mon Dec 12, 2016 4:16 pm

Bump. Many new parts. Prices adjusted.
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

kim julio
Club4AG Regular
Posts: 17
Joined: Mon Dec 28, 2015 10:23 am

Re: Ae86 misc, Springs, Interior, Gaskets

Postby kim julio » Tue Dec 13, 2016 9:31 pm

hello

T50 paper gasket set $10
NST underdrive FWD/20v water pump $20
send invoice
kimjulio@gmail.com

julio yao qbox1025
2292 N.W. 82nd Ave
Miami FL 33198
United States
(305) XXX-XX50

thank you

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Ae86 misc, Springs, Interior, Gaskets

Postby Autohaus_Z » Thu Feb 16, 2017 6:21 pm

Bump. Got another T50 gasket kit for sale!
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Rebuilt T50 + parts, Gaskets, pulleys

Postby Autohaus_Z » Sun Mar 26, 2017 2:14 am

Bump. More cool parts!
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

sekang0
Club4AG Expert
Posts: 202
Joined: Fri Jan 11, 2013 7:46 pm
Location: Stockton, CA

Re: Rebuilt T50 + parts, Gaskets, pulleys

Postby sekang0 » Sun Apr 02, 2017 12:59 am

Great seller!
'85 GT-S project since 2010
Image

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Misc parts, Syncros, RCAs, ect

Postby Autohaus_Z » Sat May 27, 2017 11:30 am

Bump. More items added. Selling new T50 Syncros now!
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Misc parts, T50, Brakes, ect

Postby Autohaus_Z » Sun Jul 30, 2017 12:39 am

Bump. Got my pictures back, added more parts!
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

S_p_R_i_T_e
Club4AG Regular
Posts: 38
Joined: Mon Jan 14, 2013 9:40 pm

Re: Misc parts, T50, Brakes, ect

Postby S_p_R_i_T_e » Sun Jul 30, 2017 3:42 pm

Would nst pulleys work for 20v rwd (in 86)?

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Misc parts, T50, Brakes, ect

Postby Autohaus_Z » Sun Jul 30, 2017 7:42 pm

S_p_R_i_T_e wrote:Would nst pulleys work for 20v rwd (in 86)?


The water pump pulley will work. The p/s pulley lines up if its a silver top (you need shorter or longer belt, I forget)
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

totta crolla
Club4AG Expert
Posts: 458
Joined: Tue Mar 26, 2013 5:21 am
Location: Oxford U.K

Re: Misc parts, T50, Brakes, ect

Postby totta crolla » Tue Aug 01, 2017 12:50 am

Would you send the P/S inner tie rods to the U.K ?

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: T50 Rebuild kit, Brakes, Pulleys, ect

Postby Autohaus_Z » Sun Aug 06, 2017 1:48 pm

Bump. More parts, plus a full T50 Rebuild kit Ive been hoarding.
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

User avatar
CloudStrife
Club4AG Expert
Posts: 401
Joined: Thu Oct 06, 2016 2:23 pm

Re: T50 Rebuild kit, Brakes, Pulleys, ect

Postby CloudStrife » Tue Aug 08, 2017 12:10 pm

May I ask why the brake brackets were trimmed? Thanks man.

Autohaus_Z
Club4AG Enthusiast
Posts: 91
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: T50 Rebuild kit, Brakes, Pulleys, ect

Postby Autohaus_Z » Mon Aug 14, 2017 1:46 am

CloudStrife wrote:May I ask why the brake brackets were trimmed? Thanks man.


More air flow for the brakes. My 86 sees plenty of track time. Lots of oems either run a brake splash shield without a "lip," or none at all. Thats why I modified mine.
Follow me on Instagram @Autohaus_Z for AE86 fun, T50 trans builds, track life, and general automotive/fabrication work!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “AE86 Parts & Accessories”

Who is online

Users browsing this forum: No registered users and 21 guests