TRD clutch pressure plate

[Stock4AG]

hey guys I am selling TRD clutch pressure plate.

It's a $250 part itself and with a TRD disc it's $400+ setup
Buy a clutch disc from TRD (Choose sport circular disc or metal 3 puck type)
I think part numbers are 31250-AE853 or 31250-TA462
you can complete the setup for about half of what you would normally spend.

Also it's made for the AE86 84-89 so it is the smaller clutch type for 200mm flywheel.

I think wondering if you can use AE86 aisin stock or whatever clutch discs on it. If you could, it would still grab good because of the included pressure. Might be a even cheaper way to go if it would work.

I am selling for $50 as pictured + shipping $10 to west cost $15 to east coast

[Stock4AG]

bump

[turboae92]

Any idea on how much torque it can handle?

[Stock4AG]

Any idea on how much torque it can handle?

It feels somewhat heavier than stock about like act2100 so i would say 300 hp and relatively torque would be ok

[turboae92]

This my situation I have a exedy stage 2 with ceramic 3 puck clutch kit.Till last week I was boosting 12 psi and now 17 psi and is slipping badd.This kit is rated for 169 tq.if I knew that it hold more than mine, I would take it off ur hand.

[4agtee]

If the pressure plate is still up for grabs, email me 4agtee@gmail.com. PayPal ready. Thanks