Troubleshoot: 16V smallport not starting
Troubleshoot: 16V smallport not starting
problem resolved.
Last edited by APO6 on Mon Apr 01, 2013 5:44 am, edited 1 time in total.
「糖分王にオレはなる！」
-
yoshimitsuspeed
- Club4AG MASTER
- Posts: 2084
- Joined: Sun Jan 13, 2013 1:18 pm
- Contact:
Re: Troubleshoot: 16V smallport not starting
Make sure there isn't any moisture in the spark plug wells. It's unlikely it would kill all four cyls but not impossible. To eliminate the dizzy you could see if there is spark coming directly off the coil wire.
Are you bolting the coils on? They ground through their mount to the chassis. If you leave it hanging or don't have a clean connection where it mounts then you won't get spark.
Are you bolting the coils on? They ground through their mount to the chassis. If you leave it hanging or don't have a clean connection where it mounts then you won't get spark.
-
totta crolla
- Club4AG Pro
- Posts: 653
- Joined: Tue Mar 26, 2013 5:21 am
- Location: Oxford U.K
Re: Troubleshoot: 16V smallport not starting
Check inside the distributor cap for damp.
Diagnostic test ?
Diagnostic test ?
Re: Troubleshoot: 16V smallport not starting
no spark coming from the coil wire and coil is mounted/grounded onto chassis. distributor cap/rotor look fine.
「糖分王にオレはなる！」