Tomei Poncam
- chemtrails
- Club4AG Enthusiast
- Posts: 110
- Joined: Sun Mar 17, 2013 2:46 am
- Location: SwangBiz - IE Gutter Trash
Re: Tomei Poncam
Failure to follow these instructions can result in death, serious injury, or equipment damage.
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Tomei Poncam
I had posted the 16V dyno, and I realized after the fact you were asking about 20V
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Tomei Poncam
oldeskewltoy wrote::oops:
I had posted the 16V dyno, and I realized after the fact you were asking about 20V
No problem bro. Please give your valuable advice...
Re: Tomei Poncam
chemtrails wrote:no, and the info is on Tomeis site
http://www.tomei-p.co.jp/_2003web-catal ... m_4AG.html
I saw that and thanks for the guide. I was confused that whether a 2 Step Dowel Pin was required for Tomei Poncam setup? Therefore I don't need the dowel pin and that sounds great. One thing do I need to replace any other head internals with the poncam replacement?