Lamda sensor 16v to 20v??

T_AE86
Posts: 5
Joined: Mon Jan 14, 2013 9:59 pm

Lamda sensor 16v to 20v??

Postby T_AE86 » Fri Feb 15, 2013 1:58 pm

Hi mates, a friend is just ending a BT 20v swap in his USDM 86, and have a question:

16v lamda sensors works in the black top 20v?

Thanks!

ga_goosh
Club4AG Pro
Posts: 542
Joined: Thu Jan 10, 2013 12:28 pm
Location: Texas

Re: Lamda sensor 16v to 20v??

Postby ga_goosh » Mon Feb 18, 2013 6:35 am

message morgan. he used to have a write up that showed what O2 sensor to use. all that was needed was to splice the O2 sensor to the 20v O2 plug. th writ up hasnt made it to the new forums yet :/
I <3 my AE86

4AG Manual
AE86 FSM

User avatar
HASport AE86
Club4AG Expert
Posts: 201
Joined: Mon Jan 14, 2013 6:09 pm
Location: Loma Linda, CA

Re: Lamda sensor 16v to 20v??

Postby HASport AE86 » Mon Feb 18, 2013 11:17 am

16v sensors do not work. Get an oxygen sensor from a N/A SW20 MR2. The 16v one is a single wire type, the MR2 one is a newer style that has four wires: signal, ground, heater power, heater ground control. You can get the universal MR2 one as well and just wire it up, either way.
SwangBiz Corolla Chassis Parts and F20/F22C/4AGE Wiring Services
(we build stuff, I solder wires, we race corollas, then we get drunk)

Proud Supporter of JSPfab.com, BattleGarage, and Solo8 LED Solutions