Throttle stop dampener

DeadDuck
Posts: 3
Joined: Sun Dec 13, 2015 6:09 pm
Location: NorCal

Throttle stop dampener

Postby DeadDuck » Wed Apr 04, 2018 5:08 pm

I was wondering if anyone knows how to adjust the throttle stop dampener? The screw has backed its self out, and now my idle is a little wonky. This is for a large port in an AE86. Thanks

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


davew7
Club4AG Enthusiast
Posts: 156
Joined: Fri Jun 06, 2014 4:34 am
Location: Michigan

Re: Throttle stop dampener

Postby davew7 » Thu Apr 05, 2018 4:01 am

Adjusting the throttle damper will not improve the idle. It only effects the throttle rate of closing. There is a rubber plug on the top of the throttle body. [ Assuming the engine is in good tune ] Under the plug is the adjusting screw you are looking for to smooth out the idle. If the problem is a high idle speed, search wax-stat. Davew7

DeadDuck
Posts: 3
Joined: Sun Dec 13, 2015 6:09 pm
Location: NorCal

Re: Throttle stop dampener

Postby DeadDuck » Thu Apr 05, 2018 4:57 pm

My idle is nice and solid, the problem is, some days its 1000 rpms, some days 1100, and some days 1200. When I pop the hood and have a look, the throttle is resting on the dampener and not on the stop. I haven't ruled out a problem with the throttle body itself. I've had it apart and cleaned it, and it works fine in hand, but who knows once things get hot. I was just wondering if anyone knew the proper way of adjusting the dampener.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: 4A-GE ENGINE”

Who is online

Users browsing this forum: No registered users and 3 guests