Can some please help me out with the camshaft and rocker arm torque specs and torque pattern for the 4ac. Also the torque specs for the flywheel bolts too, I’m kinda stuck lol
Thank you so much!!!!
4AC Torque Specs
Re: 4AC Torque Specs
Camshaft sprocket 51-79 ft/lbs
Head/Rocker Arm 62-68 ft/lbs
Flywheel 42-47 ft/lbs
Standard torque pattern for a head, the two center LH & RH bolts, then work back and forth towards the outer most bolts.
Clean and lite lube the hardware, and you be ready to go. Davew7
Head/Rocker Arm 62-68 ft/lbs
Flywheel 42-47 ft/lbs
Standard torque pattern for a head, the two center LH & RH bolts, then work back and forth towards the outer most bolts.
Clean and lite lube the hardware, and you be ready to go. Davew7
Re: 4AC Torque Specs
What about the camshaft end cap bolts?
Thank you so much!!
Thank you so much!!
Re: 4AC Torque Specs
The cam thrust plate is 96-132 in-lbs
Davew7
Davew7