Temperature sender question

mr2mk1hero
Club4AG Enthusiast
Posts: 137
Joined: Mon Jan 26, 2015 2:40 am

Temperature sender question

Postby mr2mk1hero » Wed Jan 24, 2018 1:37 am

Just a quick question.

I have been looking at the ECU pinouts to try and figure out the temp sender and temp gauge and their wiring.

As far as I figure I don't need the stock ECU in order to keep the coolant temperature gauge working properly. All I need is the temp sender and it's connection to the temp gauge in the dash.
Is this correct?
Check out my YouTube channel: https://www.youtube.com/channel/UCwosUn ... xtqkNJ3Fbg
Check out my blog: http://www.driving4answers.com/
Heaps of 4A-GE and MR2 mk1 aw11 content on both.

Davegt27
Club4AG Enthusiast
Posts: 138
Joined: Thu Jan 10, 2013 10:35 pm
Location: co

Re: Temperature sender question

Postby Davegt27 » Fri Jan 26, 2018 4:33 pm

As far as the 85 MR2 ECU is concerned that is true

So in other words the L-jet fi will have a temp sensor for fi and a different one just for the water temp gauge

Hth
Davegt27 Code One Racing