OST-045: 5AGTE.... again ;)

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Wed Jan 17, 2018 2:44 pm

Image


As arrived. The head has been cleaned, but I don't know if it has also be pressure tested, so I'll be sending it out, along with all the associated bits to get cleaned and pressure checked before I start work.

Image

The buckets and shims have seen better days... replacing them with good used units is far less costly then trying to salvage these




More to come....... :mrgreen:
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
Rogue-AE95
Club4AG Expert
Posts: 400
Joined: Thu Jan 10, 2013 4:03 pm
Location: Tampa Bay, FL

Re: OST-045: 5AGTE.... again ;)

Postby Rogue-AE95 » Wed Jan 17, 2018 3:50 pm

1.7l?

How did those shims get what appears to be rust on them??
'88 Corolla All-Trac

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Fri Jan 19, 2018 10:01 am

Rogue-AE95 wrote:1.7l?

How did those shims get what appears to be rust on them??


somewhere over 1.7 liters... final size depends on their overbore.

rusty shims - Now sure... the head came to me cleaned, but everythjing else just came in a box. The shims, and the buckets carry a moderate level of rust, so these items will be replaced.


work begins.... de-burring the casting......



Image


more to come...... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Mon Jan 22, 2018 6:19 pm

Image

working the first set of bowls and seats.....



more to come....... ;)
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Wed Jan 24, 2018 3:54 pm

2 down.... 2 to go....

Image


more to come...... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Fri Jan 26, 2018 10:35 am

Just about done on the intake side.........

Image



more to come..... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Fri Jan 26, 2018 4:40 pm

Image

next... the exhaust side....



more to come........ :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Wed Jan 31, 2018 2:16 pm

Image

Chamber work has begun.....


more to come....... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Mon Feb 05, 2018 12:47 pm

3 chambers down......

Image


sometimes the right tool is the simplest.... working the chamber wall with 120 grit. ;)

Image



more to come.... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Thu Feb 08, 2018 7:50 am

Chambers done...... (for now)

work begins on the exhaust side.... one done... one under construction


Image




more to come...... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
Rogue-AE95
Club4AG Expert
Posts: 400
Joined: Thu Jan 10, 2013 4:03 pm
Location: Tampa Bay, FL

Re: OST-045: 5AGTE.... again ;)

Postby Rogue-AE95 » Thu Feb 08, 2018 6:21 pm

That's a lot of material in the one port :!:
'88 Corolla All-Trac

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Fri Feb 09, 2018 10:08 am

Rogue-AE95 wrote:That's a lot of material in the one port :!:


with a lot more to remove!



Image

2 down... 2 to go



more to come.... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

kaosboss
Club4AG Regular
Posts: 31
Joined: Thu Jan 17, 2013 10:08 pm

Re: OST-045: 5AGTE.... again ;)

Postby kaosboss » Sat Feb 10, 2018 3:37 pm

Looking good....keep the pictures coming.

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1682
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: OST-045: 5AGTE.... again ;)

Postby oldeskewltoy » Sun Feb 11, 2018 10:47 am

kaosboss wrote:Looking good....keep the pictures coming.


;)


Ready for her multi angle......

Image



more to come...... :D
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: 4A-GE ENGINE”

Who is online

Users browsing this forum: Bing [Bot] and 2 guests