shouldn't be let anywhere near an engine, I had to stop watching after he'd scraped it on the concrete for the third time...
https://www.youtube.com/watch?v=gJDqTILzT5A
Some people
-
- Club4AG Pro
- Posts: 653
- Joined: Tue Mar 26, 2013 5:21 am
- Location: Oxford U.K
Re: Some people
video is garbage... just like that crapppy epoxied pos intake. He needs to educate Toyota
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Mon Jan 26, 2015 2:40 am
Re: Some people
I'm at work and I don't have sound. I am seriously curious about the role of all that epoxy there?
Check out my YouTube channel: https://www.youtube.com/channel/UCwosUn ... xtqkNJ3Fbg
Check out my blog: http://www.driving4answers.com/
Heaps of 4A-GE and MR2 mk1 aw11 content on both.
Check out my blog: http://www.driving4answers.com/
Heaps of 4A-GE and MR2 mk1 aw11 content on both.
- Rogue-AE95
- Club4AG Expert
- Posts: 493
- Joined: Thu Jan 10, 2013 4:03 pm
- Location: Tampa Bay, FL
Re: Some people
mr2mk1hero wrote:I'm at work and I don't have sound. I am seriously curious about the role of all that epoxy there?
He used it to fill in between the runners so that it's solid in between the smallport intake runner openings. You can see on it where the bigport gasket was sitting, and the ports were partially blocked by the epoxy. Yeah
I'd say someone is better off using one of the smallport to bigport adapter plates out there than doing this.
'88 Corolla All-Trac x2 (manual, auto)