Anyone have experience with kelord 194-c cams

Sultan
Club4AG Regular
Posts: 10
Joined: Sun Nov 22, 2015 9:57 pm
Location: California

Anyone have experience with kelord 194-c cams

Postby Sultan » Sat Nov 25, 2017 10:30 pm

Hi Again eveyone,
My car will be tuned soon and me and my tuner are wondering what would be the safe max cam angle we can advance the cam gears, my tuner says generally 3 degrees advance is safe margin.

Im using the Toda STD size pistons along with TRD head gasket so my compression now is about 12.2 and of course the piston to valve clearance is much lesser now.
Camshafts are the kelford 194-c here is a link to there specs https://www.kelfordcams.com/global/cams ... t-set.html

If anyone has any experience with similar setup to me let me know what your thoughts are.
Regards

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


Return to “TECH: 4A-GE ENGINE”

Who is online

Users browsing this forum: No registered users and 7 guests