Wiring blacktop to fire up

saigon
Club4AG Regular
Posts: 26
Joined: Fri Feb 20, 2015 3:12 pm

Wiring blacktop to fire up

Postby saigon » Wed Jun 21, 2017 10:33 am

Ok I taught I had everything figured out but doubting myself just need a simple wiring drawing to try and fire it up what wires to just make the the engine fire up all my plugs r in place engine turns over with my push button now need spark and fuel info help thanks

User avatar
morgan
Club4AG Pro
Posts: 917
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

Re: Wiring blacktop to fire up

Postby morgan » Wed Jun 21, 2017 1:51 pm

have you looked thru the DIY section?

viewtopic.php?f=28&t=4906
scroll down to the "T" & "C*" plugs
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up

saigon
Club4AG Regular
Posts: 26
Joined: Fri Feb 20, 2015 3:12 pm

Re: Wiring blacktop to fire up

Postby saigon » Wed Jun 21, 2017 3:23 pm

Yes just confused I have a wire from coil and one igniter don't know where to connect ( hot or ground don't know ) and the rest I think is in the right place ecu wires r conected starter is connected I can turn engine over but no spark yet .

User avatar
morgan
Club4AG Pro
Posts: 917
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

Re: Wiring blacktop to fire up

Postby morgan » Fri Jun 23, 2017 9:56 am

well theres a link to another site in that thread that has the pin-outs for every connector, plus the wiring section has it all laid out as well. it should be easy to figure out the wires in question
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up

saigon
Club4AG Regular
Posts: 26
Joined: Fri Feb 20, 2015 3:12 pm

Re: Wiring blacktop to fire up

Postby saigon » Fri Jun 23, 2017 1:50 pm

Just checking the sensor under coil has a blk w wire and a white wire coil and igniter hooked to get 12v but what is the white wire ( ground )?????