20v carbed Ignition

Kevin70
Posts: 1
Joined: Thu May 18, 2017 8:10 am

20v carbed Ignition

Postby Kevin70 » Tue May 23, 2017 7:36 pm

Image
goodnight everyone, im looking for some info on this particular ignition setup to use on my 20v ke70.
My weber 45dcoe setup was brought over from my old 16v, so i do have the msd 6al and timing computer but dont know HOW to work it with the 20v distributor(which pins to use).

thanks for the help in advance.

mr2mk1hero
Club4AG Enthusiast
Posts: 137
Joined: Mon Jan 26, 2015 2:40 am

Re: 20v carbed Ignition

Postby mr2mk1hero » Wed Jun 14, 2017 5:57 am

I have nothing useful to contribute, I'm sorry, but I have to say: Oh my God I am in love with those cam covers!
Check out my YouTube channel: https://www.youtube.com/channel/UCwosUn ... xtqkNJ3Fbg
Check out my blog: http://www.driving4answers.com/
Heaps of 4A-GE and MR2 mk1 aw11 content on both.

User avatar
jondee86
Moderator
Posts: 2907
Joined: Fri Jan 11, 2013 10:21 pm
Location: Wellington, New Zealand

Re: 20v carbed Ignition

Postby jondee86 » Wed Jun 14, 2017 3:10 pm

If your distributor plug looks like this....

Image

Then the pins should be...

NE Black Crankshaft Position Sensor
G1 Red Crankshaft Position Sensor
G- White Crankshaft Position Sensor
G2 Green Crankshaft Position Sensor

Don't know how that works with MSD but the 24 tooth wheel is the rpm signal
and the one tooth wheel is the crank position or reset wheel.

Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.