Page 1 of 1

20v carbed Ignition

Posted: Tue May 23, 2017 7:36 pm
by Kevin70
Image
goodnight everyone, im looking for some info on this particular ignition setup to use on my 20v ke70.
My weber 45dcoe setup was brought over from my old 16v, so i do have the msd 6al and timing computer but dont know HOW to work it with the 20v distributor(which pins to use).

thanks for the help in advance.

Re: 20v carbed Ignition

Posted: Wed Jun 14, 2017 5:57 am
by mr2mk1hero
I have nothing useful to contribute, I'm sorry, but I have to say: Oh my God I am in love with those cam covers!

Re: 20v carbed Ignition

Posted: Wed Jun 14, 2017 3:10 pm
by jondee86
If your distributor plug looks like this....

Image

Then the pins should be...

NE Black Crankshaft Position Sensor
G1 Red Crankshaft Position Sensor
G- White Crankshaft Position Sensor
G2 Green Crankshaft Position Sensor

Don't know how that works with MSD but the 24 tooth wheel is the rpm signal
and the one tooth wheel is the crank position or reset wheel.

Cheers... jondee86