20v carbed Ignition
20v carbed Ignition
goodnight everyone, im looking for some info on this particular ignition setup to use on my 20v ke70.
My weber 45dcoe setup was brought over from my old 16v, so i do have the msd 6al and timing computer but dont know HOW to work it with the 20v distributor(which pins to use).
thanks for the help in advance.
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Mon Jan 26, 2015 2:40 am
Re: 20v carbed Ignition
I have nothing useful to contribute, I'm sorry, but I have to say: Oh my God I am in love with those cam covers!
Check out my YouTube channel: https://www.youtube.com/channel/UCwosUn ... xtqkNJ3Fbg
Check out my blog: http://www.driving4answers.com/
Heaps of 4A-GE and MR2 mk1 aw11 content on both.
Check out my blog: http://www.driving4answers.com/
Heaps of 4A-GE and MR2 mk1 aw11 content on both.
Re: 20v carbed Ignition
If your distributor plug looks like this....
Then the pins should be...
NE Black Crankshaft Position Sensor
G1 Red Crankshaft Position Sensor
G- White Crankshaft Position Sensor
G2 Green Crankshaft Position Sensor
Don't know how that works with MSD but the 24 tooth wheel is the rpm signal
and the one tooth wheel is the crank position or reset wheel.
Cheers... jondee86
Then the pins should be...
NE Black Crankshaft Position Sensor
G1 Red Crankshaft Position Sensor
G- White Crankshaft Position Sensor
G2 Green Crankshaft Position Sensor
Don't know how that works with MSD but the 24 tooth wheel is the rpm signal
and the one tooth wheel is the crank position or reset wheel.
Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.