Page 1 of 1
Smallport Head
Posted: Thu Jan 12, 2017 2:19 am
by Alex170984
Hi,
The smallport cylinder head- are the bolting holes for the engine mount different to the bigport head?
Many thanks
Alex
Re: Smallport Head
Posted: Thu Jan 12, 2017 1:28 pm
by jdm86gtz
The 3 main bolts thread into the engine block, there are two 8mm bolt holes in the head for an additional mount bracket.
Re: Smallport Head
Posted: Thu Jan 12, 2017 2:26 pm
by Alex170984
Hi,
Sorry yes you are right, for some reason I was thinking the head had a mount on it but they bracket bolts to the block.
I'll not worry about the additional holes in the head, as this is going in my AW11 and I will not have anything for this.
Thanks for the reply