Smallport Head

Alex170984
Club4AG Expert
Posts: 250
Joined: Thu Jun 20, 2013 4:08 am

Smallport Head

Postby Alex170984 » Thu Jan 12, 2017 2:19 am

Hi,

The smallport cylinder head- are the bolting holes for the engine mount different to the bigport head?

Many thanks

Alex

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


jdm86gtz
Club4AG Expert
Posts: 277
Joined: Fri Jan 11, 2013 10:13 pm
Location: Ireland

Re: Smallport Head

Postby jdm86gtz » Thu Jan 12, 2017 1:28 pm

The 3 main bolts thread into the engine block, there are two 8mm bolt holes in the head for an additional mount bracket.

Alex170984
Club4AG Expert
Posts: 250
Joined: Thu Jun 20, 2013 4:08 am

Re: Smallport Head

Postby Alex170984 » Thu Jan 12, 2017 2:26 pm

Hi,

Sorry yes you are right, for some reason I was thinking the head had a mount on it but they bracket bolts to the block.

I'll not worry about the additional holes in the head, as this is going in my AW11 and I will not have anything for this.

Thanks for the reply :)

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: 4A-GE ENGINE”

Who is online

Users browsing this forum: No registered users and 3 guests