Smallport Head

Alex170984
Club4AG Expert
Posts: 345
Joined: Thu Jun 20, 2013 4:08 am

Smallport Head

Postby Alex170984 » Thu Jan 12, 2017 2:19 am

Hi,

The smallport cylinder head- are the bolting holes for the engine mount different to the bigport head?

Many thanks

Alex

jdm86gtz
Club4AG Expert
Posts: 307
Joined: Fri Jan 11, 2013 10:13 pm
Location: Ireland

Re: Smallport Head

Postby jdm86gtz » Thu Jan 12, 2017 1:28 pm

The 3 main bolts thread into the engine block, there are two 8mm bolt holes in the head for an additional mount bracket.

Alex170984
Club4AG Expert
Posts: 345
Joined: Thu Jun 20, 2013 4:08 am

Re: Smallport Head

Postby Alex170984 » Thu Jan 12, 2017 2:26 pm

Hi,

Sorry yes you are right, for some reason I was thinking the head had a mount on it but they bracket bolts to the block.

I'll not worry about the additional holes in the head, as this is going in my AW11 and I will not have anything for this.

Thanks for the reply :)