I wanted to repost this hopefully this is a good spot.
Phase 1
Replace motor with stock 20v BT w/ C.O.P. coversion.
Drive while starting "Phase 2"
Phase 2
Rebuild my currently forged 7a block to use with BT 20v head.
Raise compression
Phase 3
Rebuild head with performance valves and springs, port and polish. Install bigger cams.
Put new 7age 20v motor in car and install megasquirt.
Phase 4
Install direct port nitrous.
Here is the lucky car 1985 Corolla GTS Coupe.
7age 20v BT nitrous build
Re: 7age 20v BT nitrous build
Phase 1 is almost complete!
Installed s-86 coolent kit for RWD
OBX header
currently waiting on engine harness from tweaked and 1zz COP arived today. Should have installed this wed. I wont get much into this part as there is alot of info to find on here already.
Installed s-86 coolent kit for RWD
OBX header
currently waiting on engine harness from tweaked and 1zz COP arived today. Should have installed this wed. I wont get much into this part as there is alot of info to find on here already.
Re: 7age 20v BT nitrous build
and she's in. Shoudl have harness tomorrow