Help with 95 4Runner
Posted: Thu Aug 01, 2013 5:23 am
Hey gang, my buddy has a 95 4Runner with the 3.0L and it's having trouble. It's at his house, so I have no tools or equipment other than what I bring with me.
It will start and idle, but dies when you hit the gas. He told me the cat was bad and asked me to cut it off, since the welds were junk and he already had a new new one, I chopped it off. It was clean as a whistle and you can see right through it. So I started checking other things. I went to the TPS. I tested it with a junk multimeter and it tested bad, so we bought one and it still does the same thing. I don't want to keep throwing money at it. Where should we look next? I keep thinking the igniter could be bad.
It will start and idle, but dies when you hit the gas. He told me the cat was bad and asked me to cut it off, since the welds were junk and he already had a new new one, I chopped it off. It was clean as a whistle and you can see right through it. So I started checking other things. I went to the TPS. I tested it with a junk multimeter and it tested bad, so we bought one and it still does the same thing. I don't want to keep throwing money at it. Where should we look next? I keep thinking the igniter could be bad.