uz manual trans swap!
-
- Posts: 4
- Joined: Sat Jan 23, 2016 7:33 pm
uz manual trans swap!
okay so if i wanted to get a manual trans for an sc400 uz could i just use a transmission from a jz c300 or what. Want to know if this is possible or if I'm just dreaming Im thinking a manual v8 would be pretty sick XD
[url]http://pre15.deviantart.net/c411/th/pre/i/2014/263/9/c/wangan_midnight_vs_initial_d_by_alalagriffin-d7ztnbb.jpg/url]
Re: uz manual trans swap!
Do you mean from the manual sc 300? That would be a w58 transmission. And yes you can put just about any manual transmission behind a 1uzfe. But you will need a custom adapter plate and custom flywheel for any transmission you choose to go with none where bolt on unfortunately.
Sent from my SM-N910T3 using Tapatalk
Sent from my SM-N910T3 using Tapatalk
-
- Posts: 4
- Joined: Sat Jan 23, 2016 7:33 pm
Re: uz manual trans swap!
ok so any know any way i can actually get a custom flywheel and adapter plate? or something similar i can just drill new holes into?
[url]http://pre15.deviantart.net/c411/th/pre/i/2014/263/9/c/wangan_midnight_vs_initial_d_by_alalagriffin-d7ztnbb.jpg/url]
- ToeKnee805
- Club4AG Expert
- Posts: 299
- Joined: Wed Jan 09, 2013 8:17 pm
- Location: Southern California, 805
Re: uz manual trans swap!
if its the same as doing a manual 1UZ ae86 swap. I believe you can use a W58 transmission. Manual Swap Bellhousing. Hydraulic Throwout Bearing, 5VZFE Flywheel, and MR2 3sGTE Clutch. And a one off driveshaft.
1986 Corolla GT-S -- Unmolested -- Now Resto Project
1985 Corolla GT-S -- Turbo Levin Track Car
1982 Corolla 1.8 -- Sitting collecting dust
1985 Corolla GT-S -- Turbo Levin Track Car
1982 Corolla 1.8 -- Sitting collecting dust
Re: uz manual trans swap!
Man be a stripper for a weekend, get the money for a Collins adapter kit, that way you can run w58, z32, z33, ka24, the whole shebang off one plate.