uz manual trans swap!

hachirokusoarer07
Posts: 4
Joined: Sat Jan 23, 2016 7:33 pm

uz manual trans swap!

Postby hachirokusoarer07 » Sat Jan 23, 2016 7:50 pm

:P okay so if i wanted to get a manual trans for an sc400 uz could i just use a transmission from a jz c300 or what. Want to know if this is possible or if I'm just dreaming :lol: Im thinking a manual v8 would be pretty sick XD
[url]http://pre15.deviantart.net/c411/th/pre/i/2014/263/9/c/wangan_midnight_vs_initial_d_by_alalagriffin-d7ztnbb.jpg/url]

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


ae86cesar
Club4AG Regular
Posts: 23
Joined: Thu Jan 10, 2013 9:58 pm

Re: uz manual trans swap!

Postby ae86cesar » Sun Jan 24, 2016 6:21 am

Do you mean from the manual sc 300? That would be a w58 transmission. And yes you can put just about any manual transmission behind a 1uzfe. But you will need a custom adapter plate and custom flywheel for any transmission you choose to go with none where bolt on unfortunately.

Sent from my SM-N910T3 using Tapatalk

hachirokusoarer07
Posts: 4
Joined: Sat Jan 23, 2016 7:33 pm

Re: uz manual trans swap!

Postby hachirokusoarer07 » Mon Jan 25, 2016 2:40 pm

ok so any know any way i can actually get a custom flywheel and adapter plate? or something similar i can just drill new holes into?
[url]http://pre15.deviantart.net/c411/th/pre/i/2014/263/9/c/wangan_midnight_vs_initial_d_by_alalagriffin-d7ztnbb.jpg/url]

User avatar
ToeKnee805
Club4AG Expert
Posts: 299
Joined: Wed Jan 09, 2013 8:17 pm
Location: Southern California, 805

Re: uz manual trans swap!

Postby ToeKnee805 » Thu Feb 04, 2016 6:17 pm

if its the same as doing a manual 1UZ ae86 swap. I believe you can use a W58 transmission. Manual Swap Bellhousing. Hydraulic Throwout Bearing, 5VZFE Flywheel, and MR2 3sGTE Clutch. And a one off driveshaft.
1986 Corolla GT-S -- Unmolested -- Now Resto Project
1985 Corolla GT-S -- Turbo Levin Track Car
1982 Corolla 1.8 -- Sitting collecting dust

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


Calikid
Club4AG Enthusiast
Posts: 55
Joined: Thu Jul 16, 2015 8:01 pm

Re: uz manual trans swap!

Postby Calikid » Thu Sep 15, 2016 9:38 pm

Man be a stripper for a weekend, get the money for a Collins adapter kit, that way you can run w58, z32, z33, ka24, the whole shebang off one plate.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: Inline 6's and V8's (JZ, G, UZ etc...) and Big Sedans”

Who is online

Users browsing this forum: No registered users and 1 guest