OST's recent post of his OST-39 work brought this back to mind.
So recently I started the long process (because I like to take my time on projects) of removing the engine & gearbox from my AE95. I decided to pull the intake manifold to make it easier to separate the engine from the gearbox, which has to be rotated a little before it can be removed (to clear the transfer case). Anyways with the IM off, I had a look into my 1st gen 4A-FE's ports. In port 4 I found this beauty:
I'm glad I took the IM off and saw this. I'm thinking about attacking it with my Dremel. Carefully of course, can't have shavings getting sucked into the engine
The joys of mass-produced parts (head casting)
- Rogue-AE95
- Club4AG Expert
- Posts: 493
- Joined: Thu Jan 10, 2013 4:03 pm
- Location: Tampa Bay, FL
The joys of mass-produced parts (head casting)
'88 Corolla All-Trac x2 (manual, auto)
Re: The joys of mass-produced parts (head casting)
No, keep it. It produces voticies to keep the fuel mixed.
One shot, one kill.