Zenki Coup w. rocket bunny wing is my fav.... I'd go there if I didn't have a hatch. Looking good man

I just replaced 90% of mine 2 weeks ago. -Brand new Fuel pump bracket/Gasket/screws from Toyota. -New Denso Fuel pump (oem replacement) -3/8 Braided stainless/Nylon Hose +swivel ends [You should get 1 of the ends as 90 deg elbow to keep from pinching the frame] -6AN /Metric adapter (to connect new l...

So does using COP with a 20v swap eliminate the firewall clearance issue? (ae86)

they are most likely filled...

Probably need to adjust your timing, sounds like your not burning the fuel. Wouldn't hurt to change your plugs as well

At first I thought those were snowflakes... But its like a Snowflake Remix

Could use a deep cut polish and wax. Believe it or not, there's shiny paint hiding under that pink

So your just gonna tell us about it and not take pics?

love me some datsun. photos.more.yes

Good luck man. Hope you have space to work on it.

Cut the entire tower from a donor car and swap over

ae86714 wrote:i tried him a few times over the last month or so, seems to have gotten busy or something. I got a response on the first text, but after i started asking about shipping he stopped responding.

It says "everything needs to be gone in 2 weeks or going to scrap yard"

looks good from the pictures.... but there isnt a single exterior shot. everything is zoomed in.

Craigslist post says it hasnt been ran in 6 years. so check to see if it even runs.

Procrastinated with my new wheel also

Made a braided 3/8th line to the front. New denso pump/ toyota bracket/ fuel filter.... Still not getting fuel to the rail. :x http://img.photobucket.com/albums/v705/igotrice87/image2_zps37014141.jpeg http://img.photobucket.com/albums/v705/igotrice87/image3_zps67dcb9cd.jpeg http://img.photobucket.co...

Howd you get that car in NC?? I'm thinking of NC, USA

Nice write up. what is a Tazz?

Personally I feel that they would look too big.

Best way to find out is to measure both seat and cabin area

Good deal on a SC AE86.

Mandatory pics of next Lemons, and we wont say anything! lol

I always wanted an SW20. Still do. Only problem is that I'm not going to give up my AE86 as my project car. Also my DD cant be a 2 seater (I'm always hauling DJ equipment) http://stancewords.stanceworks.netdna-cdn.com/wp-content/uploads/2011/12/widebody-mr2-turbo-trd-work-meister-title.jpg

Damn this is a good deal. Too bad i just bought a wheel lol

Probably a stupid question buuuuut I want to clarify something that's been bugging me about this swap. For someone with an SR5, can someone wire the engine harness' so that you don't have to rewire the whole damn car? You will still need to add wires for a fuel pump going to the back as well as und...

Isn't there a $500 limit for Lemons?

Make sure you take care of you bushings first. its like $125 from prothane for full poly bushing kit.

30 yr old bushings can keep stiff spring rates feeling loose

Any reason for 17s? Jw seems like it would be heavier.

Wiring the factory oil pressure sensor currently on my AE86.

Is this where the wire connects to the harness?


AE86
4age
Hicomp head on AE101 block
Zenki AE86 Harness

Thanks

Bushings are one of the most fun parts to work on the AE86! Especially if you burn them out.

My integra is doing the same thing.... just not as drastically.

Check the correct sequence for bleeding. Sometimes it's different than the normal: farthest from MC to closest.

I've never seen that car before!