Search found 96 matches

by GZE_RA21
Tue Mar 01, 2016 1:46 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE idle hunt problems
Replies: 22
Views: 2543

Re: 4AGZE idle hunt problems

It's all starting to sound more likely to be a fuel issue than anything else. I tested ask the points at the ecu to measure the voltage received at the ecu connectors and everything was in spec with the excepting of one if the two iscv points - with the ignition on and engine off spec is 9-14V One w...
by GZE_RA21
Sun Feb 28, 2016 3:41 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE idle hunt problems
Replies: 22
Views: 2543

Re: 4AGZE idle hunt problems

First of I'd like to thank you for taking the time to help me out like this, i really appreciate the input and advise i feel like I'm slowly sifting through the problems one by one. Checked resistance at the ecu terminals- IDL-E2 had continuity when closed and deflected to infinity when opened IDL-E...
by GZE_RA21
Sun Feb 28, 2016 10:55 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE idle hunt problems
Replies: 22
Views: 2543

Re: 4AGZE idle hunt problems

Interesting, yes the tps differences between the GE and GZE are minimal. My harness has not been cut or tampered with regarding the tps, although I will investigate further to eliminate any possibility. I will continue checking the tps along with reading voltage inputs at the ecu and check for any i...
by GZE_RA21
Sat Feb 27, 2016 8:45 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE idle hunt problems
Replies: 22
Views: 2543

Re: 4AGZE idle hunt problems

Might be something useful in here... http://www.mr2australia.com/mr2play/tm.aspx?m=103064 Symptoms sound exactly like a 4AGE (N/A) with a blocked waxstat, but I don't know if those are used on the GZE. Cheers... jondee86 Thanks for the input! I did come across that in my searching, I used his techn...
by GZE_RA21
Sat Feb 27, 2016 11:36 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE idle hunt problems
Replies: 22
Views: 2543

4AGZE idle hunt problems

Hey club4ag! I've been on here for awhile but this is my first post, i looked here and on other sites for an answer but can't find many people who actually posted the solution to their idle problem. It's doing the infamous idle hunt as the title said, I've been talking to yoshimitsuspeed about this ...
by GZE_RA21
Fri Feb 12, 2016 5:25 pm
Forum: TECH: Corolla AE86
Topic: Ogiptech bellhousing?
Replies: 1
Views: 562

Re: Ogiptech bellhousing?

I personally bought the ogiptech bellhousing and it works great! Very satisfied and Remy is a super cool and very helpful dude. I mated my bellhousing to the larger 225mm 4AGZE clutch pressure plate and flywheel and with a little bit ground down on one or two edges it worked with no problem, i dont ...

Go to advanced search