Search found 439 matches

by notnilc20
Sun Dec 10, 2017 7:40 am
Forum: TECH: Corolla AE86
Topic: Jumper cable mishap burrrnnnnn
Replies: 10
Views: 108

Re: Jumper cable mishap burrrnnnnn

So my friend put the cables on incorrectly just for a second and now won’t start. It’s getting no spark. Everything else is good. Car cranks but there’s no spark. I check at the spark cables, No spark. check at the coil cable no spark. I checked the igniter and it’s getting power and ground. How do...
by notnilc20
Tue Dec 05, 2017 9:17 am
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

Now that the rear bumper is ready for bodywork, it's time to get the sideskirts installed. But all is not so easy as I have to make several corrections to these skirts to fit right. Thanks for watching.
https://youtu.be/Lo_evzU9Uu0
by notnilc20
Sat Dec 02, 2017 7:55 am
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

Doing a lil free giveaway for my Subs! Hit 555 subs! It's a Christmas miracle....enter for your chance to win a cool prize ae86 related.
https://youtu.be/y3Wx3d8y-4k
by notnilc20
Thu Nov 30, 2017 6:09 pm
Forum: TECH: Corolla AE86
Topic: Strange noise from under vehicle
Replies: 8
Views: 203

Re: Strange noise from under vehicle

Ae85? Sounds like a heat shield....iirc there is one in the rear above muffler, one above the bend over the axle and another one above the catalytic converter......but I'm not familiar with any ae85....
by notnilc20
Sat Nov 18, 2017 8:07 pm
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

Solid work man, when I work with fiberglass, to me it is easier to saturate the matt first then lay it. I find I get less bubbles that way. It does make a huge mess though on large sheets like you were using. I was digging the side brackets too. I think they'll look great once they're painted. I wi...
by notnilc20
Fri Nov 17, 2017 2:57 pm
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

In this first of a few episodes I begin installing the rear bumper on the 86. Cutting and reglassing, Fabricating brackets, and bumper supports to get it to fit properly....what more could you want??
Enjoy...
https://youtu.be/30MgX27zyP4
by notnilc20
Thu Nov 09, 2017 9:07 am
Forum: Want to BUY (seeking sellers)
Topic: Headliner for hatchback w/ sunroof
Replies: 0
Views: 64

Headliner for hatchback w/ sunroof

Including the pass side oh **** handle. Thx.
Email me
notnilc20@hotmail.com
by notnilc20
Fri Oct 27, 2017 9:36 pm
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

looking and sounding good man, I love your paint job. Where did you get the body kit from? The fitment shouldn't be that far off I would think. Thanks man....here's a link to the body kit...it's just a cheap jblood knock off....wonder if they mistakenly sent me like a wide body rear bumper??? Oh we...
by notnilc20
Fri Oct 27, 2017 9:14 am
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

Sorry it's been sooo long since my last video...I reveal what has been taking up all my time. Then I Fix the fuel level sender and refurbish a battery tie down bracket. Mock up the front and rear bumper covers. Also, Gotta backtrack yet again and fix this exhaust and get this car straight so i can f...
by notnilc20
Mon Oct 16, 2017 11:17 am
Forum: TECH: Corolla AE86
Topic: RHD Conversion
Replies: 11
Views: 428

Re: RHD Conversion

This seems like so much work....rather import one from Japan. Out of curiosity.....what is the purpose of this conversion?
by notnilc20
Mon Oct 02, 2017 12:39 pm
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

I refresh the hubs with new bearings and revamp the brakes. Then i finally install the coilover suspension i assembled from the previous episode. Then of course the all important test drive. Enjoy the vid.

https://youtu.be/DqfRTxl5470
by notnilc20
Wed Sep 27, 2017 6:56 pm
Forum: Fun Talk
Topic: Need a price reference
Replies: 17
Views: 720

Re: Need a price reference

How's the chassis? Much rust?
by notnilc20
Wed Sep 27, 2017 7:43 am
Forum: Fun Talk
Topic: Dori-Kaze FINISHED?
Replies: 15
Views: 796

Re: Dori-Kaze FINISHED?

Kind of interesting... I was having a browse on Dorikaze tonight and reading a thread about the lack of activity on the site/FB killing the forums etc. Could have been copy+pasted from a similar thread here :) Ultimately, people who like FB gonna look for their info there (GL wit dat) and people wh...
by notnilc20
Mon Sep 25, 2017 4:34 pm
Forum: DIY, do it yourself projects and tricks
Topic: AE86 short stroke conversion
Replies: 8
Views: 298

Re: AE86 short stroke conversion

Oh I see....yeah....I think I can picture it in my head. I'll see if it's that big of a deal and if so, I'll spring for the bearing high hats.
by notnilc20
Mon Sep 25, 2017 2:20 pm
Forum: DIY, do it yourself projects and tricks
Topic: AE86 short stroke conversion
Replies: 8
Views: 298

Re: AE86 short stroke conversion

Weird bro,, are Tein plates red now?? lol. You can test it out now if you want, as long as your steering is all connected to the spindle. If you turn it left or right and the pillow ball nut (middle with sleeve) loosens/tightens and it has been torques all the way... THen you'll have an issue They ...
by notnilc20
Sun Sep 24, 2017 12:05 pm
Forum: DIY, do it yourself projects and tricks
Topic: AE86 short stroke conversion
Replies: 8
Views: 298

Re: AE86 short stroke conversion

CloudStrife wrote:Yeah no problem man, just mentioned it because with my Cusco camber plates they would bind when turning steering. I think you have T3 plates so you should be good to go..


No, I have Tein plates....hopefully it'll be all good. Just waiting on some brake parts right now or i'd test it out for sure.
by notnilc20
Sun Sep 24, 2017 7:13 am
Forum: DIY, do it yourself projects and tricks
Topic: AE86 short stroke conversion
Replies: 8
Views: 298

Re: AE86 short stroke conversion

Great job man, we now have a full engrish video on short-stroke conversion lol. Any reason why you didn't get the needle bearing high-hats? Thanks man.....I just used the ones that were supplied in the weld on kit. I should've asked if I could pay extra for the upgrade....I just didn't think about ...
by notnilc20
Thu Sep 21, 2017 7:08 pm
Forum: AE86 Parts & Accessories
Topic: 1985 GTS Toyota Hatchback Partout New One
Replies: 40
Views: 3040

Re: 1985 GTS Toyota Hatchback Partout

If you have any headliner for hatchback w/ moonroof, I'm interested. Hey dude, yeah I have headliner with moonroof available for a hatchback. I'm interested but i would need it shipped to 38671....would you be willing? Maybe via greyhound? If not I understand because it's a pia. Just let me know.
by notnilc20
Wed Sep 20, 2017 6:20 pm
Forum: DIY, do it yourself projects and tricks
Topic: AE86 short stroke conversion
Replies: 8
Views: 298

AE86 short stroke conversion

Taking my oem shock housings and converting them to a short stroke suspension. Hope you enjoy! https://youtu.be/gFGSgNFI-cQ Ps- forgot to mention in the video that the reason I didn't show me cutting the oem spring perches off is because I had to do it in a very dodgy way. Basically, whilst standing...
by notnilc20
Wed Sep 20, 2017 2:59 pm
Forum: Fun Talk
Topic: Dori-Kaze FINISHED?
Replies: 15
Views: 796

Re: Dori-Kaze FINISHED?

xslowpokex wrote:Yea dude... kids today dont do forums its just "instagram" builds , saddest thing ever, its pretty much a picture and a comment like "look at my new 20x18 Work Meisters fam!!!! 100!!! #stanced" lol hahaha


Haha...so true.
by notnilc20
Tue Sep 19, 2017 12:06 pm
Forum: TECH: Corolla AE86
Topic: Short stroke shocks front and rears alternatives.
Replies: 35
Views: 2706

Re: Short stroke shocks front and rears alternatives.

Hi Jondee86 I finally got it all situated. Seems that with the shorter 765015 shock inserts the oem gland nuts should work....however I had already ordered the t3 set, so I just used those. I also only needed one washer as a spacer. Here is a video I made of the whole process. Should I post this in ...
by notnilc20
Tue Sep 19, 2017 12:00 pm
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 147
Views: 15462

Re: notnilc20's 1986 ae86 Hatch build/restoration

Short stroke conversion video. Tell me whatcha think? Hope you enjoy.
https://youtu.be/gFGSgNFI-cQ
by notnilc20
Sun Sep 17, 2017 11:26 am
Forum: TECH: Corolla AE86
Topic: Why is my horn electrical plug on the right (pass) side?
Replies: 0
Views: 137

Why is my horn electrical plug on the right (pass) side?

Just wondering why on my electrical harness the horn plug is on the passenger side? When I bought the car it was in the midst of a gts conversion. So I'm not too familiar with this harness. Kind of annoying because I have to extend the wires back to the driver side as the horn is mounted there. Or I...
by notnilc20
Sun Sep 17, 2017 7:55 am
Forum: AE86 Parts & Accessories
Topic: Assortment of Parts for Sale (updated 12/7/16)
Replies: 29
Views: 6352

Re: Assortment of Parts for Sale (updated 12/7/16)

Would you be able to ship the GTS steering wheel (pics avail?) and the rear passenger side seat belt at my expense? My zip is 38671. My email is notnilc20@hotmail.com

Thank you.
by notnilc20
Sat Sep 16, 2017 6:41 am
Forum: Fun Talk
Topic: Dori-Kaze FINISHED?
Replies: 15
Views: 796

Dori-Kaze FINISHED?

Just wondering if anyone knows what is going on with Dorikaze.net? It's been down for what seems like 2 weeks? These forums are going extinct.....I sure hope club4ag doesn't go that route. Thanks.
by notnilc20
Sat Sep 16, 2017 6:37 am
Forum: AE86 Parts & Accessories
Topic: 1985 GTS Toyota Hatchback Partout New One
Replies: 40
Views: 3040

Re: 1985 GTS Toyota Hatchback Partout

If you have any headliner for hatchback w/ moonroof, I'm interested.
by notnilc20
Tue Sep 12, 2017 10:05 pm
Forum: TECH: Corolla AE86
Topic: Short stroke shocks front and rears alternatives.
Replies: 35
Views: 2706

Re: Short stroke shocks front and rears alternatives.

When you get the T3 gland nuts be sure to do a test fit right away with an insert inside the strut tube and see if it will thread in far enough to get some good thread engagement. It's difficult to pick up on the pics of the nut, but it seems to have a tapered inside diameter... so difficult to gue...
by notnilc20
Tue Sep 12, 2017 11:34 am
Forum: TECH: Corolla AE86
Topic: Short stroke shocks front and rears alternatives.
Replies: 35
Views: 2706

Re: Short stroke shocks front and rears alternatives.

You will have to do some measurung and figuring to see if the rear inserts can be used... https://i.imgur.com/vqWcBgS.jpg When you look at the gland nuts that came with the inserts, and slide one down over the spear, you will see how the nut sits on the top of the cartridge. How much thread engages...
by notnilc20
Sun Sep 10, 2017 5:33 pm
Forum: TECH: Corolla AE86
Topic: Short stroke shocks front and rears alternatives.
Replies: 35
Views: 2706

Re: Short stroke shocks front and rears alternatives.

Have you checked to make sure the new gland nuts have the same thread as the AE86 strut tubes ? I think I got some but the thread was wrong. If the thread is good, see how many turns it takes to get the nut all the way down without the insert in the strut. Then see how many turns you can get with t...
by notnilc20
Sun Sep 10, 2017 7:36 am
Forum: TECH: Corolla AE86
Topic: Short stroke shocks front and rears alternatives.
Replies: 35
Views: 2706

Re: Short stroke shocks front and rears alternatives.

If you can't exchange them, then you can probably use them if the gland nut threads on far enough. Are you using the OEM gland nut ? If you are then it will be sitting up high on the insert unless you have had the inside diameter turned out on a lathe. Like, the insert does not slip inside the OEM ...

Go to advanced search