Oem balancer and t3 camgears

Is there a difference in key ways on the crankshaft for 4age big port in a aw11 and a 4age big port in a ae86? I thought a big port 3 rib was a big port 3 rib regardless the car. The reason I ask is when I line my harmonic balancer up with the timing marks my piston is not at the top of its stroke a...

great post

hey guy to make a long story short I have just pulled the 16v big port 3 rib out of a mr2 and put it in one of my ae86s so other than some brackets and water pump pulley head ache a strait drop in. I've been driving the carp out of the car and I was going down the road turning 2900 rpm and my engine...

Rogue-AE95 wrote:MR2... GZE or GE? .

the motor is a 4age out of a mr2 im putting it in my rwd ae86 so i have the t50 trans
does any one know if the ralco rz part number [R56005FXZ] will work with my exedy 16954a clutch

So I bought at tf01 exedy flywheel for those who may not know that is the flywheel for a mr2 and there is a difference. Something I did not know I also bought a exedy clutch kit. So my question is what do I keep and what do I change the flywheel or the clutch kit seeing as they cost about the same? ...

for that price range seeing as ive been there before i would go with Megan racing or cx racing ive had both and they are the exact same. they have okay valveing i think they offer 6k front 8k rear that gives the car a sporty feel but allows a good ride. you can find them on amazon well the last set ...

So I have leak in my gas tank that I've patched a few times and am tired of screwing with it. Nevertheless I have a fuel cell and surge tank laying around and I want to put it in my car but ican't seem to find factory specs for the pump on screwgle. So I want to ask you guys who have put them in bef...

the only code i have is #6 rmp or crank angle pulse. it is running fine now i have the old injectors in it now because they checked out okay. so what do i do now that i am popping a code

Any iconic toyotas can post as well I just want to find guys local to the area that wanna take a twisted road and grab a bite to eat or something

So my car will run for a min or so but it will pop like there is a small vac leak or something. Then out of nowhere almost it starts to bog down and then go back to idle. It will do that a series of times then die and if I start it back right after it does this it will bounce rpm up and down and the...

It's not running right now I'm having I think injection trouble

I have no idea but I just wanted to get new injectors for the car. So I did and I put it all back together and now it will run fine like a top but as soon as it gets warm it starts to bog down until death. I got remanned injectors if that means anything and any ideas on what is going on

so guys i am getting all the odds and end together to reassemble my 86 4age motor and one of the things i was going to replace is the injectors and guess what the guys at yota have done, they have discontinued the series of injectors so does anyone have a brand of injectors they know/trust that i ca...

Well guys I got a call from the machine shop and my stem seals on my valves are the wrong size someone had pulled the head off of my car before I got it and placed the wrong size seals in them that explains all the symptoms I've had so thank you for all of the imputand advice. I'm still going to reb...

This is oil that it is throwing out not just condensation because I pulled the header off the car and ran it to watch and see if oil was dripping down from the valves and being thrown out of the exhaust and it was.thats why I pulled the head I also understand that it should have carbon built up but ...

And Saying I get a step up can and 10:1 Pistons

I would do the assembly myself but what can I do to help give u guys a better idea of what I need to do and the head and value checked out the seals are bad so that saved a little but my main concern on cost is part how much will that run me

I have a manual over 4age and 4agze motors as a pdf i don't know if its a fSm and I know a shop that works on 4age motors often for autocross guys so they are dependable but what is the estimated cost of all of this and is oem a necessity or is there a brand that is okay to use for rebuilding. also ...

I just want it to be dependable with maybe 20-30 more hp and I want it to be semi cost effective another thing is I've never rebuilt a motor period so I will be opening up a can of worms I've never felt with so I'm intimidated if that's understandable

So should I rebuild it or swap it because I want a lil more power and if it cost 3000 to swap it and 2500 to rebuild it why not sway it because I'm going to have to rebuild the trans in it because the t50 is made of glass so I've heard and it's already popping out of second

so i have pulled the head on my 86 ae86 because it started to puke oil out the tailpipe. a couple things i have found the pistons were covered in carbon along with the valves. oil sitting on top of the valves and the intake manifold was absolutely filled with black tar more or less. just to add on t...

hey guys i've got some 15x9 rota shakotan on my car and i am wanting to use the center caps off my old rim those being the supra celica 14x7 any ideas on how to retro fit them?

guy once again thanks a million you all rock. i want to turbo the car so looks like im going to turbo it. also i promise im not just going to slap a turbo on and hope for the best i will do it right.

My car has had a engine swap so im not sure what motor is in it a 7 rib or 3 rib. If it is a 3 rib I will put high compression pistons in it and a different camshaft. Now with that said if I have a seven rib motor I will give it forced induction and all of the necessary upgrades to do so because its...

yoshimitsuspeed after reading the mile long page u have on boosting 4age ive desided depending on the block i have because my car had a motor swap but to another 4age back in the 90s if it is a 3 rib hicomp pistons if a 7 rib turbo does this sound like a good idea

See this seven rib, three rib, and long block what does all this mean

What about forced induction would that be out of the question it being a 16v

Sounds good man pm me when u wanna meet up

im on the other side of Nashville sadly but in Nashville pretty often because i run my rc drifter (dont judge haha) with some friends on the weekends. so hit me up if you ever make it this way and we will defiantly have to roll in the rollas